Nistune Forums

You can burn a 16K from NIStune... What you can do is start with the 32K NIStune ROM file then load your factory file into NIStune, then sync the maps from ECU into that file, then change address file to the 16K CA18 one then save the ROM. it should save it as a 16K ROM file with your updated maps i...

The knock sensors for Z31s I believe are all the same, the daughterboards should be also. They are just a frequency filter

When using the emulator, open up the file for the vehicle which matches the ROM size. For example if you have a CA18 then use the S13_CA18_128_E.adr file in the 16K address file directory The 128 = 16K x 8 bit and 256 = 32K x 8 bit This will configure the upload size for 16K and should upload to the...

Well now we have another version up tonight 0.9103 Logging record/playback switching is now fixed. Sorry about that :-( I noticed that the O2 flag display isn't currently working on the grid either when you tick the box. That section to do with displaing values against various flag filters is still ...

the timing discussion was in the bugs section

you will see my version of disassembly here. yours is more accurate. as you say the second timing table is used in addition to the first table depending on knock (and temperature.. as you found) conditions

viewtopic.php?t=262

That is correct. As far as I am aware the turbo/non turbo ECUs are identical apart from this (and the mod above... for Z31) The ROM images themselves for RB30ET which I have analysed side by side are almost identical. It is mainly the settings (constants) which are different (things like indicating ...

Okay I'll have a look at that tonight. I've been working a lot on the recording/logging items Bascially when you have a consult / wideband feed it should show all the available sensors in the drop down lists These will be available when you record. After you record... if you hit the play button it s...

not available for Type 1 im afraid... only Nissan consult

R31 has this wire too... i installed a trip computer from a Ti model into mine to use it. works well

Its on the ever expanding list!

This was mentioned in the email about the other timing tables. I assume that there would be not much/any adjustment at 80 deg C from the logs that I have receive I'll have to look for those tables and see if they appear to be in degrees The latest software version released uses a new offset for tabl...

If you can send through a log of that I can play it back and have a look Got another CA18 ECU here now with knock detection board working on it... so can have a look at knocking problems too The Injection value, I have used reverse engineering and routine comparison against the R32 skyline again for...

Okay I have fixed up the registration issues so should now be all good. Please let me know if there are any more problems with that. Tested it on two separate PCs with various keys just to make sure Peoples individual licenses are now being properly enforced - USB consult - Emulator - Extended Consu...

I've had some emails this morning about registration issues with this version. Have confirmed this is the case and will put a fix and an upissue release tonight

Okay this release has a fair few bug fixes in it. Now available for download from the release area. Updated the bug fix spreadsheet in this directory too to indicate remaining issues/enhancements I've still got the TechEdge disconnect issues to resolve, and make the Extended Consult more tolerant of...

Its going to be coming out tonight... but its not completely finished. Peoples installations are starting to expire so this version will be available a bit early