Nistune Forums

Just letting you guys know I wont be back until Tuesday

No probs. Make sure you get him to send the part number 23710-xxxxx which lets me identify the exact ECU. I can give him a file with turbo maps in it if he is putting on a turbo There are some ECUs which are NA and half the size of a regular SR20 ECU. These need a Type 5 board. I have been working o...

Very strange... 1. What version of the software are you using (Help - About). Try sticking with 9.109 2. Open NIStune without loading anything else. File - Configure - Debug logging 3. Close and restart NIStune (Logging is now activated) 4. RB20 address file seems to be loaded from your screenshot.....

This is for Z31 (1984-1986) / R31 / VLT vehicles with the modifications required
http://home.aanet.com.au/nistune/afmupgrade.htm

Later model Z31 ECUs use Jasons page instead
http://www.redz31.com/pages/fuel/afmcrap.html

Can you shoot me through the ROM image for that vehicle? You should be able to use emulation with nistune

Type 3 board will fit a SR20DE so you just need to tune via consult port. Pete has tuned a few of these now with our boards.

8 bit VH45DE fills the entire 32K ROM chip, theres no room to fit my Type 2 firmware so we cant do a board for those VH41 might be the same .. 16 bit would be a Type 3 board. These have the same configuration as S14 Note that the S14/Z32 ECU connector plugs are exactly the same also. I can run Z32 R...

Most likely can do it... if not can use an emulator at least

I would need the ROM image and a picture of the inside of the ECU to start with. Send those through and I can have a quick look

yes i had maptracing and realtime emulation working quite well on that ECU

I've added TP to be uploaded to the emulator so you can realtime stream consult with load/RPM and realtime tune on this ECU

This has been updated to give you 9 more usages after expiry. This is because we have users who may not have used nistune for a while and are getting expired software messages and unable to tune.... So to avoid this situation occuring again next version 0.9111 will have some extra retries to avoid f...

your answers here
http://ecu2.forumwise.com/ecu2-thread1780.html

We noticed this issue with the older BlaZt cables which seemed to introduce comms errors. They then dropped the USB chip they were using and use the FTDI one like the PLMS USB cables now used I noticed from your email that you were using "one of peters units (NEWKLEER)" So was that a NEWKL...

file has been emailed

I think I've got what you're saying... when the maptrace cursor is floating around the screen you hit the space bar and then the editing cursor moves to where the maptrace cursor was Let me know if that is correct. I can implement that but currently the space bar is used for marking cells, so perhap...

It is possible if it supports 0-5 volt output