Nistune Forums

I fianlly had a chance to install .9095 today. Only was able to let it run at idle. Everything connected as expected. Trace worked fine. Innovate A/F returned as before. I assume that changing the TP values and the RPM values is done by using the raw or hex values, double clicking the row or column ...

I was using .9071a when the LM-1 unit was working. I am not sure which patch code revision, but it was what ever the latest was at the time.

Jason,
What version of NisTune are you using? Are you running your LM-1?
I had similar problems with the last version .9081a. Haven't had time to check this current version .9084a that was posted on the 30th.
Matt said that it is supposed to support the LM-1 again.

Still no luck. I removed version 908a and installed 9081a. When I checked the "about NisTune" it said I was using 908a. Are they one in the same? I tried to find the debug logs. I assume that they are in the consult log location? There are files in there that correspond to the date and tim...

Posted: Mon Oct 09, 2006 7:27 am Post subject: -------------------------------------------------------------------------------- what firmware version were you using with the previous nistune version (was it patch version 4/5?) I was using .907a until the time ran out. Worked fine with the wideband....

Tried again today. This time I put a chip in place of the roumlator. Connected the consult USB cables to the laptop and opened NisTune. I loaded in the address Z31_128E, put in the same image that was on the chip. Turned the key to the on position, clicked the consult button...consult opened and the...

When I press the wideband button the window opens, the notes at the bottom tell what the wideband is doing, but it never shows a value. The value shows up in the box in the top right hand corner of the fuel map. When I try to log ther is no selection for the AFR in the drop down list. It stops with ...

Version .907a expired. Can we get an update please.
Thanks.

Matt,
I burned my tuned bin files into the 88nacastock_nt base bin file as my old one wouldn't work with the latest version of NisTune. It works and then for some reason it gives me an error message about not being a good bin.
I'll get a copy of it off to you.
Any word on the 84 ECU I sent you?

I was having some problems with the consult conecting. I thought it was taken care of with the connection inside the ECU. Today at the autoX event I was trying to log some A/F and RPM logs. I got everything set to go and running and took off on a run. When I got back the Log had disconnected. When w...

Got it fixed. The problem was as simple as reading the diagnostic file and checking the possible fixes. In simple terms the consult connection inside the ECU had wiggled loose. Can it be hot glued in place?

Actually I havent tried turning off everything and letting it sit. I suppose that when I started in today everything had been off for a while and it still didn't work. I don't have the NVRAM chip. I am using the dautghter board with a roumulator. I uninstalled Nistune and reloaded it. Then tried fre...

Having problems with consult connecting again. It was working fine on the dyno. We were loging and tuning. Then conlult stopped working. We restarted Nistune. No luck. Rebooted the computer. No luck. Problem started when we changed the K value of the injectors to lean out the car. I tried reloading ...

Just had a thought. When I was logging at an autoX event a couple of weeks ago, one of the values I picked was "speed" in reviewing the logs speed showed as 0. I know I am slow, but not that slow. Where are the readings for speed picked up? My speedometer was not working that night. The la...

Thanks for your help. I had most of it right, just forgot to upload the 88ss file to the emulator so it was still running my old file. Made that change and Consult worked. Changed the innovate com port from 5 to 8 and it works. I tried the other two 88 na files and they also worked. I assume that I ...