Search found 87 matches

by my1path
Wed May 06, 2015 4:19 am
Forum: Type 2
Topic: Timing issues
Replies: 46
Views: 15464

Re: Timing issues

I found this on an older thread. I'm going to add it to the file and see If I can get any closer to my actual Idle numbers. I will report back with all my offsets so they can be included with future updates. http://forum.nistune.com/viewtopic.php?f=8&t=588 IDLE_TIMING_MAP_OFFSET= EDIT: Nope, 0, ...
by my1path
Wed Apr 29, 2015 1:02 pm
Forum: Software Bugs
Topic: Speed Trial Function not stopping
Replies: 4
Views: 2374

Speed Trial Function RESOLVED

I just installed 1.2.41 and Speed Trial now works. Thankyou for fixing this and thank you for incorporating the change I recommended to allow selectable stop functions similar to the selectable start functions. I now feel like I can take my tune a lot farther without a co-driver and without a dyno w...
by my1path
Fri Oct 24, 2014 10:13 am
Forum: Software Bugs
Topic: Speed Trial Function not stopping
Replies: 4
Views: 2374

Re: Speed Trial Function not stopping

Thanks, looking forward to this working. I do not have access to a dyno and I do not have a reliable co-driver with a stopwatch.
by my1path
Thu Oct 23, 2014 12:25 am
Forum: Type 2
Topic: Timing issues
Replies: 46
Views: 15464

Re: Timing issues

Ok, I think I can live with a minor reporting discrepancy since I know that it is really doing what the map says and not what Consult reports. I may not be able to fix the Consult reporting when in/out of gear. This is something Nissan consult reports to us. I provide the ability to report the consu...
by my1path
Wed Oct 22, 2014 3:29 pm
Forum: Type 2
Topic: Timing issues
Replies: 46
Views: 15464

Re: Timing issues

Try adjusting your offsets for M30 CONSULT_TIMING_OFFSET=20 TIMING_MAP_OFFSET=5 You can edit your address file under Documents\Nistune\Address\M30_VG30E_256_E.adr Issue raised: http://www.nistune.com/mantis/view.php?id=25 Let me know how that goes Thankyou, I did not realize I could edit this file....
by my1path
Wed Oct 22, 2014 2:50 pm
Forum: Type 2
Topic: M30 Enrichment Table Problems
Replies: 5
Views: 2378

Re: M30 Enrichment Table Problems

Ok, I discovered my O2 feedback temp was too low and raised it. Now I can consistently set my warmup enrichment up to about 80c/175f as long as;
1) I keep all 3 maps the same
2) O2 feedback is set to 80c or higher (I will probably be disabling O2 sensing altogether anyway)
by my1path
Tue Oct 21, 2014 3:07 pm
Forum: Type 2
Topic: M30 Enrichment Table Problems
Replies: 5
Views: 2378

Re: M30 Enrichment Table Problems

Nissan wrote the ECU code such that after cranking, it would lock onto a particular table based on the cranking temperature (being above/below 15 deg BDTC) I have no intention of updating the firmware to customise this further. However I can update the firmware (if I do a feature pack release) such...
by my1path
Mon Oct 13, 2014 4:41 am
Forum: Software Bugs
Topic: Speed Trial Function not stopping
Replies: 4
Views: 2374

Speed Trial Function not stopping

Running an M30 ECU and my Speed Trial function does not stop. Consult displays my current speed and the Speed Trial Clock starts just fine on both RPM and speed triggers but it does not Stop when I reach my desired "Time to reach" speed. Also, can we have the option added to have it stop a...
by my1path
Mon Oct 13, 2014 4:20 am
Forum: Type 2
Topic: Additional High temp enrichment for M30 ECU?
Replies: 5
Views: 2201

Additional High temp enrichment for M30 ECU?

This was touched on briefly in another thread so when you get time could you find out if there is an over temp table available for the M30 ecu. Or some possible way to increase fuel when coolant temp gets really high? On longer drives and hard pulls I'll see 100c/212f and engine seems to want more f...
by my1path
Mon Oct 13, 2014 4:14 am
Forum: Type 2
Topic: M30 Enrichment Table Problems
Replies: 5
Views: 2378

M30 Enrichment Table Problems

Can you have a look at the enrichment tables? The weather here is getting colder here and it seems like the tables are not acting the way they should be. I'm warming up way too lean and I can't seem to change it. Here are some of my observations. I Used the Temp Conv Tables to simulate various tempe...
by my1path
Mon Oct 13, 2014 3:16 am
Forum: Type 2
Topic: Timing issues
Replies: 46
Views: 15464

Re: Timing issues

I'm just now coming back to this (life happens) I have downloaded NIStune Version 1.2.20 (Test release) and I like what I see. But I am still having incorrect timing offsets. Consult is reporting +10 from the actual Idle N and Idle (not N) settings. Timing light shows my actual idle matches the idle...
by my1path
Wed Oct 08, 2014 12:44 am
Forum: Type 2
Topic: Lean Tuning with or without o2 sensor?
Replies: 4
Views: 1944

Re: Lean Tuning with or without o2 sensor?

Will this hurt the sensor since it is no longer heated?
by my1path
Tue Oct 07, 2014 3:54 pm
Forum: Type 2
Topic: Lean Tuning with or without o2 sensor?
Replies: 4
Views: 1944

Lean Tuning with or without o2 sensor?

I'm finally taking some time to get back into nistune. (Bought another project, had a baby, work stuff etc... life) and I was trying to lean out the first two columns of the fuel map. With the "O" flag off I cannot make the cell leaner than 14.7. With it on I can go leaner on the map but t...
by my1path
Thu Jun 26, 2014 3:26 pm
Forum: Type 2
Topic: Timing issues
Replies: 46
Views: 15464

Re: Timing issues

I am trying to set up the Temp Enrich to add more fuel when the Temps exceed 193F for additional fuel cooling. My engine will run up to 210F (99c) out here on hard drives which is fine but it begs more fuel at that temp vs when its running at 180F (82C) That table is only used upto about 80-85degC ...
by my1path
Thu Jun 26, 2014 5:05 am
Forum: Type 2
Topic: Timing issues
Replies: 46
Views: 15464

Re: Timing issues

Thanks for the continuous development and support. "Temp Enrich" does not highlight green under any circumstance There are over 100 tables. I've got most of them highlighting but this one is missing from the table highlight code so that has been added for that version also. In addition to ...