easiest way to explain it is to compare a Z32-41Pxx file before and after an import and some weird compare to the original pre-FP version.
Search found 677 matches
- Sat Dec 24, 2016 7:53 am
- Forum: Type 2
- Topic: Z32 FP defaults changed off scale
- Replies: 2
- Views: 1400
- Sat Dec 24, 2016 7:50 am
- Forum: Type 2
- Topic: request 11U0F_TPS without VCT function
- Replies: 7
- Views: 2669
Re: request 11U0F_TPS without VCT function
Works a treat.
- Thu Dec 22, 2016 8:00 am
- Forum: General Nistune Discussion
- Topic: Fuel map dynamic range
- Replies: 8
- Views: 3849
Re: Fuel map dynamic range
Due to the obvious 255's (max bin number) everywhere it would indicated to me that a bad read or bad write occurred. That looks more like an attempt to Track tune a car with auto corrections on high correction limits, maybe a massive exhaust airleak, a very short exhaust that backfires a lot on dece...
- Sun Dec 11, 2016 8:20 am
- Forum: Mechcnical and Running issues
- Topic: rb25det CAMSHAFT 272 duration
- Replies: 1
- Views: 5736
Re: rb25det CAMSHAFT 272 duration
Measure the lobe to head clearance on all the pockets and you figure out how much lift the new cams can have.
Best ask supplier if VTC needs to be removed. Most after market cams won't fit the VTC any more.
Best ask supplier if VTC needs to be removed. Most after market cams won't fit the VTC any more.
- Sun Oct 30, 2016 7:36 pm
- Forum: FAQs
- Topic: possible tune download?
- Replies: 3
- Views: 4199
Re: possible tune download?
This what I have for an SR20. Hope it helps.
- Wed Oct 19, 2016 7:40 am
- Forum: Type 2
- Topic: request 11U0F_TPS without VCT function
- Replies: 7
- Views: 2669
Re: request 11U0F_TPS without VCT function
Thank you Matt.
I had this on my list to follow. Appreciate it very much.
I had this on my list to follow. Appreciate it very much.
- Thu Oct 13, 2016 7:12 am
- Forum: Type 2
- Topic: request 11U0F_TPS without VCT function
- Replies: 7
- Views: 2669
Re: request 11U0F_TPS without VCT function
Ok. Will do.
Thanks Matt.
Thanks Matt.
- Thu Oct 06, 2016 8:42 am
- Forum: Type 2
- Topic: request 11U0F_TPS without VCT function
- Replies: 7
- Views: 2669
Re: request 11U0F_TPS without VCT function
What will it cost us to have a special TPS only FP build when you're back in action?
- Fri Sep 30, 2016 9:09 pm
- Forum: Type 2
- Topic: request 11U0F_TPS without VCT function
- Replies: 7
- Views: 2669
request 11U0F_TPS without VCT function
Matt, Do you have an FP.ent for 11U00 that only has the TPS functionality but not the VCT function? I ask this to assist in troubleshooting a strange random idle behavior after 60deg. I've found that switching from an FP_11U0f TPS_VCT base to the basic FP 11u0f base seems to resolve the issue but it...
- Wed Sep 14, 2016 7:21 am
- Forum: Type 2
- Topic: Z32 V4 FP for RB25 Timing going to 0 off idle.
- Replies: 7
- Views: 2512
Re: Z32 V4 FP for RB25 Timing going to 0 off idle.
I'll leave this one alone at this point as Matt is the gospel on this.
- Tue Sep 13, 2016 11:11 am
- Forum: Type 2
- Topic: Z32 V4 FP for RB25 Timing going to 0 off idle.
- Replies: 7
- Views: 2512
Re: Z32 V4 FP for RB25 Timing going to 0 off idle.
Its not just about an FP base map. It also coincides with FP code which you do not have.
You can not burn roms or use an emulator with any FP functionality. Probably same goes for new versions of original code such as V4 etc.
You can not burn roms or use an emulator with any FP functionality. Probably same goes for new versions of original code such as V4 etc.
- Tue Sep 13, 2016 5:12 am
- Forum: Type 2
- Topic: Rb25/30 stock ecu
- Replies: 1
- Views: 1348
Re: Rb25/30 stock ecu
It will most likely start and run, but I've found with more capacity the engine needs a substantial amount more enrichment in places where it previously did not. most common changes are the load maps and cold run fuelling areas.
- Mon Sep 12, 2016 3:29 pm
- Forum: Type 2
- Topic: Z32 V4 FP for RB25 Timing going to 0 off idle.
- Replies: 7
- Views: 2512
Re: Z32 V4 FP for RB25 Timing going to 0 off idle.
Does the type 2 base image match the new base map image?
if not, and I read correctly "ostrich" emulator. it won't work properly.
The type 2 board has FP code in it which your Ostrich doesn't. The FP code uses new address files.
if not, and I read correctly "ostrich" emulator. it won't work properly.
The type 2 board has FP code in it which your Ostrich doesn't. The FP code uses new address files.
- Tue Aug 23, 2016 6:00 pm
- Forum: Type 3/4/5
- Topic: MSD ignition: DTC 21 + timing off scale
- Replies: 15
- Views: 8197
Re: MSD ignition: DTC 21 + timing off scale
Well Done.
- Wed Mar 23, 2016 9:59 am
- Forum: General Nistune Discussion
- Topic: nistune not displaying correctly?
- Replies: 5
- Views: 2518
Re: nistune not displaying correctly?
Check display settings. Make sure text is set to small or 100%: Control Panel\All Control Panel Items\Display
and also try this after.
Control Panel\All Control Panel Items\Display\Screen Resolution is set to default resolution for your size screen.
and also try this after.
Control Panel\All Control Panel Items\Display\Screen Resolution is set to default resolution for your size screen.