Nistune Forums

values that high? what about e85?

don't rb20 have pressure compensated fuel reg from standard anyway. that's why I installed one. When i bought the engine the previous owner had one. Then i put a turbosmart 1200 on. And set to 43psi with vac line off at idle.

I do have a turbosmart rising rate fuel reg.

Hi people I have tuned my rb20 on e85. All my values in the raw fuel map high load high rpm are down to around under 6 and still super rich . Is my injection multiplier to high at cruise (set to lambda at cruise). And if lowered would that give me a little bit more room in my map to play. My setup 1...

Im also a beginner What i found i had to do was adjust the injection multiplier up untill it wanted to run. That was with the latency set at 990us for my 1000cc injectors. Im not sure what your latency values are supposed to be for your injectors. I think they are around 700us. Have a search. Let us...

When the car is running i have nistune connected the lm2 powered up and plugged into computer. When i go to connect to the wideband nistune hesitates and then says wideband disconnected. So this is annoying because i cant log in nistune and im tearing my hear out

Ok so. I got onto innovate tech support and there are drivers you can install under the logworks 3 program files.

Has anyone had and drama using the lm2 on a windows 10 computer. i have tried updating the driver and windows says none can be found.
i had no problems with windows 7

thanks guys

yes ok. easy i was thinking that the ecu would chase 14.7 afr not lambda, if it does chase lambda makes it exactly the same as you would tune for unleaded then?
correct?

Want to know if it will be possible to tune with ethanol only and no flex sensor. Has anyone achieved this. Wouldnt you have to disable o2 sensing so the fts and ftl dont chase 14.7.

Thanks