Nistune Forums

Any chance of a 3j501 feature pack for p11 primera. My k value is way off to get the fuelling right and final injection multiplier badly needed.

Cheers
Daniel.

Hi guys. This is probably more for matt than anyone else. I asked a while ago about the feature pack being released for the 3J501 ecu specifically for the P11 Primera. I have been waiting to order a base image programmer but would love for this to become available so i can make use of the new featur...

hi there matt. I was wondering if you ever got round to playing with an autotune feature for the volumetric efficiency enabled ecus? Was just wondering if you could come up with something similar to the afr autotune feature but just for tuning ve so that trimming on the 02 is as close to zero percen...

that would be a awsome addition to the autotune feature. i had a wee play last night and noticed that the tracer is now working perfect. would be great to have that feature so that it automatically adjusts ve to as close to zero percent short term trim as possible. i have had a wee play with the ve ...

hey matt. is there any chance you could get the feature pack for 3j501 p11 ecus released any time soon. just ordering a base image programmer to update mine and realised that 3j501 isnt on the list of supported feature pack ecus for p11 primera.

thanks
Daniel

hey matt. is there any way that you can impliment ve map autotune for us guys running ve map enabled ecus. I think this would help greatly to get ve roughly in the right area and then tweak manually. I know its another thing to add to your very long list but it would really help make the later model...

Hey matt thanks for the reply. I have looked at the pinouts and all seam the same apart from fuel pump output would need to be repinned and I think the injector 2 and 3 need swapped but other than that it should be OK for the pulsar ecu. P10 primera ecu are hard to come by now here in the UK.
Thanks

Hi there. I have a p11 primera which I have done my own turbo build on. I'm currently using a type 4 nistune board with the stock 97 primera ecu. However this ecu uses volumetric maps aswell and I would like to switch to an older generation ecu which doesn't use volumetric maps. Can I swap to a puls...

this looks really promising. seams to work much better than a bee r limiter and launch control ( valvetrain smasher)

need to get this up and running on my p11

depending on which wideband you are using it can be easier than others. ive personally found aem serial interface on there widebands to be a nightmare but thats just my personal experience. i use innovate widebands on all my cars due to the simplicity of getting them talking to nistune. on innovate ...

i have some experience from this from using narrowband simulation on my p11 turbo. The stock calibration for the innovate narrowband input is slightly different out the box from the voltage output of the standard nissan narrowband sensor. this causes the ecu to try and target a richer closed loop af...

i have had a problem with consult connectivity before and it turned out to be the factory consult connector that runs into the stock harness was the problem, for a more stable connection you can go the wreckers yard and cut another consult connector and loom from any 90s nissan and hard wire it at t...