Nistune Forums

No, They are definatly a dodgy copy. I know first hand

There's several, Auto or Manual ?

Interesting! Mine has no nissan badge, but has protective/flow stabilizing mesh on both sides of it. p/n 22680-30P00, orange sticker. All Z32 AFMs don't have the Nissan badge for some reason.. But just a look at the measuring wires will tell you if it's original or not. ALL Genuine factory parts ha...

Why this design is so complicated? I think it is possible to store all rom data in realtime memory, isn't it? It's not quite that easy... The LC system requires a significant rewrite of the OEM code to operate. Putting the program into RAM requires an image from somewhere, so it kind of defeats the...

Great move guys, I really like the simplified version.

Stu

Keep in mind if you use an external trigger wire on the highest A line, you should also put a 4.7v or 5.1v zener and a couple of resistors to limit both current and voltage, otherwise you can potentially fry the ECU if things go a bit silly. (i've repaired more than a few ECU's over the years due to...

Sorry, my bad.. CA's on my list of things to do.... The daughter boards are for SR's too..
Do you know anyone good with electronics where you are ? Because the multi chip system is easy to do, but you need a bit of understanding on how to do it..

Stu

Pete has daughter boards that take 4 programs, you can select any one of 4 programs - the catch is there are no real time adjustments..

Just purchase my launch Control Program and your troubles are gone !.

Stu

Doesn't quite work like that, Nistune has extra firmware in the NVRAM, loaded from the factory. The chips are surface mounted, EPROM to NisTune NVRAM operates in a diferent fashion. But you can get some larger EPROMS and split them into 1/2, put your saved maps in there and use the highest A line to...

try a table located at 0x7888-0x7893. Can't verify it without a car, sorry - Anyone got a R32 GT-R round here I can pinch for half a day ?? I'll find it quick as with a vehicle...


Stu

it uses the same a/d conversion table as the water temp sensor. looking further for ya.

Stu

Register found, looking for tables...
Stu

Had Pete asking me for this one too.. Can you tell me which register the air temp's currently using [if its displayed in the consult data display box] - i have no RB26 ecu to test things with, and I'll work back from there...

Stu

I've got a routine written for the Z's, did it long ago !!. I need to get my mates the car up the street for a day to refine the secondary limiter...

Stu

Stu how about type-4 P11 3J504 ? You need me to send complete ecu or just the nistune board? thanks I don't have a type 4 variant developed yet, or even a 3J504 rom (wanna send me a base image??) - to do this requires the car at my workshop for a couple of days - but I might be able to work it out ...