Ok, quick update.
It was indeed my intake. Just tried to make it longer and the problem went away
Search found 13 matches
- Sun Jul 26, 2020 11:37 pm
- Forum: Type 3/4/5
- Topic: Hunting for Idle - AFM issues?
- Replies: 10
- Views: 3412
- Sun Jul 26, 2020 1:59 pm
- Forum: Type 3/4/5
- Topic: Hunting for Idle - AFM issues?
- Replies: 10
- Views: 3412
Re: Hunting for Idle - AFM issues?
Looks like My Wideband is really laggy comparing to narrow band
It actually gets really rich before stalling.
It actually gets really rich before stalling.
- Tue Jul 21, 2020 1:43 pm
- Forum: Type 3/4/5
- Topic: Hunting for Idle - AFM issues?
- Replies: 10
- Views: 3412
Re: Hunting for Idle - AFM issues?
Thanks for the explanation Matt.
Would you consider it normal for AFR to lean out as the result of it?
Would you consider it normal for AFR to lean out as the result of it?
- Tue Jul 21, 2020 8:31 am
- Forum: Type 3/4/5
- Topic: Hunting for Idle - AFM issues?
- Replies: 10
- Views: 3412
Re: Hunting for Idle - AFM issues?
Also screenshot of the logs of the car dying after quick rev is below
Thanks a lot for your help
Thanks a lot for your help
- Sun Jul 19, 2020 10:17 pm
- Forum: Type 3/4/5
- Topic: Hunting for Idle - AFM issues?
- Replies: 10
- Views: 3412
Re: Hunting for Idle - AFM issues?
Also one very important piece of info:
Before it started doing so the car has been sitting on stands for about a year. In that time I’ve installed this turbo, exhaust and intake.
Checked for vacuum leaks - didn’t find anything too bad.
Before it started doing so the car has been sitting on stands for about a year. In that time I’ve installed this turbo, exhaust and intake.
Checked for vacuum leaks - didn’t find anything too bad.
- Sun Jul 19, 2020 8:14 pm
- Forum: Type 3/4/5
- Topic: Hunting for Idle - AFM issues?
- Replies: 10
- Views: 3412
Re: Hunting for Idle - AFM issues?
Logs and bin files attached.
- Sun Jul 19, 2020 3:43 pm
- Forum: Type 3/4/5
- Topic: Hunting for Idle - AFM issues?
- Replies: 10
- Views: 3412
Hunting for Idle - AFM issues?
Hi guys, I'm getting this issue on the video here: https://www.youtube.com/watch?v=1mGYS6f8ZN8 Starting from about 1 minute in the video. It idles somewhat fine. A bit rich but fine, then if you rev it quickly it dies. I've noticed that when it was idling MAF reading was around 1.1 - 1.2, but after ...
- Wed Jun 19, 2019 1:21 pm
- Forum: Type 3/4/5
- Topic: Tune after Upgrading afm and injectors
- Replies: 3
- Views: 1372
Re: Tune after Upgrading afm and injectors
Cool thanks for the prompt answer.
I wonder why reputable tuner went negative originally. It's not a common practice isn't it?
I wonder why reputable tuner went negative originally. It's not a common practice isn't it?
- Tue Jun 18, 2019 9:59 pm
- Forum: Type 3/4/5
- Topic: Tune after Upgrading afm and injectors
- Replies: 3
- Views: 1372
Tune after Upgrading afm and injectors
Hi guys, I realise its a noob question, but I think I read every doc on the net multiple times and still cannot figure out whats going on. I have S15 with feature pack ecu. Recently Ive upgraded AFM to Z32 and stock 480cc injectors to 1000cc Xspurt. As for the tuning I went and resized AFM and Injec...
- Mon May 06, 2019 9:49 pm
- Forum: Type 3/4/5
- Topic: Fan Control Question
- Replies: 2
- Views: 915
Re: Fan Control Question
Hi Matt, I don't know whether it did anything or not - but I think I figured what the problem was. It just jumped the second cell. Basically it was staying in the first cell until the temperature reached the 3rd and went there. I haven't had a chance to try switch-off functionality on the cool-down ...
- Sat May 04, 2019 3:16 pm
- Forum: Type 3/4/5
- Topic: Fan Control Question
- Replies: 2
- Views: 915
Fan Control Question
Hi, I'm trying to get nistune to control Fans on my Jap spec S15, but it seems that I cannot get it to go from one temp band to another. No matter what temperature is only left top cell controls the fan. Screen Shot 2019-05-04 at 1.20.52 pm.png On the pic you can see the temperature is 75deg, but st...
- Fri Dec 08, 2017 7:44 pm
- Forum: 14Point7
- Topic: Support for Spartan Controller
- Replies: 1
- Views: 10216
Support for Spartan Controller
Hi,
I wanted to check if nistune supports these Widebands: https://www.14point7.com/products/spart ... ntroller-2
Cheers
Kostya
I wanted to check if nistune supports these Widebands: https://www.14point7.com/products/spart ... ntroller-2
Cheers
Kostya
- Tue Jan 10, 2017 10:09 pm
- Forum: General Nistune Discussion
- Topic: Nistune on Apple Macbook
- Replies: 4
- Views: 3245
Re: Nistune on Apple Macbook
Any idea if you can run it from VM such as VirtualBox?