Search found 25 matches

by tastyratz
Fri Feb 24, 2012 6:43 am
Forum: General Nistune Discussion
Topic: low throttle angle rpm drops WAY too fast, small turbo car
Replies: 2
Views: 1666

low throttle angle rpm drops WAY too fast, small turbo car

So I boosted my car and went with a nistune setup all at once. I have a 95 240sx with a ka-t and a t25 sr turbo. The turbo is clearly too small for the engine but it's what i have. The car builds boost remarkably fast, and I could be seeing full boost by 1400rpm. I tend to build boost at very low th...
by tastyratz
Thu Feb 09, 2012 2:08 pm
Forum: General Nistune Discussion
Topic: Can some one give me a general run down on building a vq map
Replies: 16
Views: 10709

Re: Can some one give me a general run down on building a vq map

I would think you could take an existing maf inline with the maf in question, and datalog voltages from both at the same time, then comparatively build at least a good section of the vq map. If you have a maf that is going to run out of steam, at least that builds the section up until it does? I won...
by tastyratz
Wed Dec 28, 2011 2:26 am
Forum: FAQs
Topic: My nistune is do to expire????????????
Replies: 4
Views: 5424

Re: My nistune is do to expire????????????

Matt on this topic, I have never let Nistune expire... but will it completely disable or just nag once it expires? If you are one day hit by a bus or fall off an unfortunately cliff (unfortunate for you), is there any reason for us to believe that our software will just stop working and all owners s...
by tastyratz
Wed Dec 14, 2011 7:27 am
Forum: Software Bugs
Topic: autotune not detecting decel fuel cut, 0's out fuel cells??
Replies: 4
Views: 2816

Re: autotune not detecting decel fuel cut, 0's out fuel cells??

anything on this? ideas? anyone else see this behavior?
by tastyratz
Sat Nov 19, 2011 9:41 am
Forum: Software Bugs
Topic: Where is the bug list these days?
Replies: 10
Views: 3831

Re: Where is the bug list these days?

http://www.techenclave.com/operating-sy ... 45539.html
That might be helpful for those that struggle with unsigned drivers and a win 7 64 machine.
by tastyratz
Sat Nov 19, 2011 7:04 am
Forum: Software Bugs
Topic: autotune not detecting decel fuel cut, 0's out fuel cells??
Replies: 4
Views: 2816

autotune not detecting decel fuel cut, 0's out fuel cells??

I thought I would give autotune a try last night with a laptop hooked up just street driving. Does autotune have a minimum tps voltage we can set somewhere to kick in, or does it sense decel fuel conditions? I was maintaining a speed with on and off throttle but after a few minutes the car ran terri...
by tastyratz
Fri Nov 18, 2011 9:01 am
Forum: Type 3/4/5
Topic: question in regard to s14 VE map (ka*t)
Replies: 5
Views: 4211

Re: question in regard to s14 VE map (ka*t)

I wanted to bump an old thread with a good question. I have been trying to tune via VE table and it does not seem to really make any difference? Do we 100% realize exactly how the ve trim table functions? Are there instances where it is disregarded as a function, such as with the o2 turned off/ unpl...
by tastyratz
Fri Nov 18, 2011 1:46 am
Forum: Software Enhancements
Topic: recently used/opened file?
Replies: 4
Views: 2931

Re: recently used/opened file?

I've been accused of doing worse :-p

What is nistune programmed in? maybe there are existing free code snippets out there you could pillage online? If I get some free time next wacky idea I get I could see if there is any existing code supporting the idea or closely adaptive...
by tastyratz
Fri Nov 18, 2011 1:30 am
Forum: Others
Topic: Datalogging Motorola MPX4250
Replies: 11
Views: 8945

Re: Datalogging Motorola MPX4250

I do prefer 0psi to read 0psi, I was under the impression that it would erroneously report by reading the white paper. I have purchased one but not yet used it. Although I suppose it also matters if you purchased the absolute sensor vs the regular one? I was thinking the sensor ranging down to 0kpa...
by tastyratz
Thu Nov 17, 2011 5:25 am
Forum: Others
Topic: Datalogging Motorola MPX4250
Replies: 11
Views: 8945

Re: Datalogging Motorola MPX4250

actually, to be even more accurate... reading from 0 psi as a start would not be correct. the sensor starts at 0 kpa which is -14.5037738 psi. Wouldn't it be more accurate to start at 200,-14.504 and finish at 4900,36.259? 0 psi atmospheric is after all, 100 kpa...
by tastyratz
Thu Nov 17, 2011 3:14 am
Forum: FAQs
Topic: NIStune video tutorial
Replies: 10
Views: 8045

Re: NIStune video tutorial

I'm not sure I care as much about a video presentation of nistune as much as I might care for a chm help file with up to date descriptions when the software is updated, or a tooltips type blurb with tables (i.e. a small single line below the window title for crank enrich that says "fuel used du...
by tastyratz
Wed Nov 16, 2011 2:15 pm
Forum: Software Enhancements
Topic: recently used/opened file?
Replies: 4
Views: 2931

recently used/opened file?

would it be possible to have recently opened files quickly selectable from the file menu?
by tastyratz
Wed Nov 16, 2011 2:13 pm
Forum: Software Bugs
Topic: undo button not functional?
Replies: 1
Views: 1700

undo button not functional?

I have performed operations on my map I wished to undo, but the undo button appears grayed out all the time? Should this be functional if I want to revert to a cells saved values, last entered value, etc?
by tastyratz
Wed Nov 16, 2011 2:11 pm
Forum: Software Enhancements
Topic: keyboard shortcut/button for "copy compared selected value "
Replies: 2
Views: 2241

keyboard shortcut/button for "copy compared selected value "

Another one of my ideas tonight, I seem to have a string of them. prioritize dismiss or however, I have no expectation. I did however think when comparing multiple maps I wanted to copy a few values over, but I did not want to have to launch multiple steps to copy an entire selection, why not have a...
by tastyratz
Wed Nov 16, 2011 1:54 pm
Forum: Software Bugs
Topic: 0.10.12 logplayer graphs out of sync with data
Replies: 3
Views: 2130

Re: 0.10.12 logplayer graphs out of sync with data

for what it's worth, I do not experience this to the same degree. What I noticed was my log player "appears" about 1 mouse click off ish. For example, if I was ACTUALLY at 2000rpm with the player line position, hit right on the keyboard 1 time and it should display as 2500rpm but instead d...