Nistune Forums

Is there some news for the s12 CA18ET ?
type 1 board possible or not ?

wrong part number ? of the ECU or of the board ? I don't understand what can cause this problem ... in fact I don't know what is the ENT file for.

My mate is sending you back the board.

in australia what type of CA18 ECU do you have ? 36F00 ?

What can cause this type of problem in the NET file ? I don't know what is in this files ?

I don't have the base image programmer ... so I will send it back to you .

do you think the ENT file is just wrong ? or something else ?

We tried the 36f00 board in the 44f07 ecu and it is making the same problem.

what will be the more simple ? reprogram the board or send it to you ?

how can I reprogram the board ?

what is different beetween 36f00 and 44f07 ?

Hi all ! After many many things tried, the probleme was allways there ... the car has a MECD 003 ECU ( 36F00) with a type 1 board 36F00 whe tried another ECU : MECD 009 ( 44F07 ) with a 44F07 board and we wrote the same .bin on it, and the problem is not there .. then we tried the 36f00 ecu with the...

P11 address file is wrong, there is no limit tables, I tried with standard limit tables of sr20de and works fine, can you modify this address file please ?

thank you.

TOMEI Cams 270° 8.8mm
SARD 800CC injectors
Z32 AFM
GT3076R garrett turbo T3 flange A/R .63

and off course all of the normal stuff for a 500hp engine ....

the problem occurs only if the gaz pedal is hit fast, in 3rd 4th 5th gear it is ok but in 2nd and in 1st it occurs at any time

Hi all, I have an issue with a mate's car that is running very very very rich when I hit the gaz , the cars slows down, with very high injection time that drop after that and when the injector comes good the car goes fine until red line normaly I started to see the increase fuel VS TPS voltage table...

It's working fine without the board fitted.

I have also changed the address file with ttp min max activated. and it solves my problem.

so now every thing is working on my P11, happy !

the board mode is OK no problem with that at all !!
it is just the ECU mode that is not working.

and no problem also with the rev limiter, the problem is with TTPmin, TTPmax and TP limit that are not in the adress file..

Hi all !! I have fitted my type 4 board in my 3J504 ECU and it works fine . only few issues first : I have fitted a switch on R020 and R021 to switch between stock map and nistune board . ( E85 tune - stock SP98 tune ) but when switch on nistune board ( R020 on )it works and consult connects. but wh...

Can you give us an exemple of nistune file in .txt that works please ? when I try to open mine after editing to .txt , that don't want to work ..

here is mine :
thank you.

found it, thank you matt, I had filtered view activated.