Search found 14 matches

by cruzy6
Sat Jan 06, 2018 5:38 pm
Forum: Type 2
Topic: Rb26 stands alone loom
Replies: 3
Views: 1227

Re: Rb26 stands alone loom

Hi. Thanks.
Could some one post a photo of where on the loom this plug is and what it looks like.
by cruzy6
Fri Jan 05, 2018 3:12 pm
Forum: Type 2
Topic: Rb26 stands alone loom
Replies: 3
Views: 1227

Rb26 stands alone loom

Hi. Im doing an engine conversion with an rb26 from an r32 gtr.
How does nistune connect to the ecu.
Is there any particular plugs i need to keep on the factory loom?
Also. If i run a single slot afm. Will the factory plugs get cut off and spliced together?
Thanks
by cruzy6
Fri Sep 09, 2016 9:21 pm
Forum: Type 2
Topic: Rb25/30 stock ecu
Replies: 1
Views: 1348

Rb25/30 stock ecu

Hi.
I have an r33 skyline. Was looking at rebuilding a rb30 with the rb25 head and fitting that in.
How well Would it run with the stock ecu etc.
Cheers
by cruzy6
Wed Sep 07, 2016 10:02 pm
Forum: Type 1
Topic: Rb25 rb30 idle motor control
Replies: 1
Views: 1333

Rb25 rb30 idle motor control

Hi. Just wondering if other idle motors will work with the stock ecu. I think on all the rb25 rb30 rb26 motors the factory idle motor at the back of the factory inlet is basically the same. If i fit a new forward facing inlet can i use a throttle body that has an idle motor fitted that's not the fac...
by cruzy6
Fri Jan 01, 2016 11:28 am
Forum: Type 1
Topic: feature pack
Replies: 1
Views: 2342

feature pack

hi, is the feature pack compatible with the older versions.
can maps ect be loaded from older tunes
by cruzy6
Wed Jul 08, 2015 1:07 pm
Forum: Type 1
Topic: VL Turbo 5 cylinder tune
Replies: 9
Views: 3310

Re: VL Turbo 5 cylinder tune

does anyone know what table the ecu access between drive and neutral.

car stationary in drive afrs are good but as soon as its in neutral they go rich
by cruzy6
Wed Jun 24, 2015 8:37 pm
Forum: Type 1
Topic: VL Turbo 5 cylinder tune
Replies: 9
Views: 3310

Re: VL Turbo 5 cylinder tune

had a quick play with it. i changed the fuel map to another one i had (might look familiar matt) and tweaked the latency and the k constant, seems a bit better. doesnt seem to lean out now. still goes a bit too rich and doesnt richen up early enough (boost starts around 2500rpm) but i guess thats ju...
by cruzy6
Tue Jun 16, 2015 10:06 pm
Forum: Type 1
Topic: VL Turbo 5 cylinder tune
Replies: 9
Views: 3310

Re: VL Turbo 5 cylinder tune

ok when i get a chance ill check for leaks
why is it so rich at idle, i thought the ecu and 02 sensor automatically trim it to 14.7

and where it goes real lean is a massive flat spot, like the revs just stop at 2000 to just a crawl till it gets to 3000. then it seems fine.
by cruzy6
Sun Jun 14, 2015 2:23 pm
Forum: Type 1
Topic: VL Turbo 5 cylinder tune
Replies: 9
Views: 3310

Re: VL Turbo 5 cylinder tune

i recorded a log

got it to right temp, then just drove around the block.
by cruzy6
Thu Jun 04, 2015 8:06 pm
Forum: Type 1
Topic: VL Turbo 5 cylinder tune
Replies: 9
Views: 3310

VL Turbo 5 cylinder tune

hi, i got my car tuned, while on the dyno it popped a head gasket. when i fixed it and got it going again it was running on 5 cylinders. number 5 was missing. i beleive it was running on 5 cylinders when it was tuned. now its on 6 again, at idle its on 12 to 11 a/f. as i accelerate it leans to 17 wh...
by cruzy6
Sat Jan 31, 2015 10:06 pm
Forum: Type 1
Topic: different MAF voltages
Replies: 1
Views: 1214

different MAF voltages

hi just looking at the maf wiring guide.

it says that RB30 and z31 VG30 use 2 - 7 volts.

do i assume all the other mafs use 5 volts.

would all the other mafs work on a VL once the voltage mod was done to the ECU.
by cruzy6
Wed Jul 09, 2014 11:13 pm
Forum: Type 1
Topic: mystery injectors.
Replies: 3
Views: 2020

Re: mystery injectors.

they were bought new and fitted by a work shop. just not 100 percent what size they are. at the time i was told there 440cc.

this is what they look like.

http://i620.photobucket.com/albums/tt28 ... jector.jpg

Image
by cruzy6
Wed Jul 09, 2014 1:26 pm
Forum: Type 1
Topic: mystery injectors.
Replies: 3
Views: 2020

mystery injectors.

hi i have hose tail injectors in my VL turbo. there blue.
people who installed them only know them as merc injectors. i bought them 3 years ago. they may be bosch 036. is this is the same.
can any one tell me exactly what cc they are and what latency they are.
is the latency important?
by cruzy6
Wed Feb 26, 2014 10:26 pm
Forum: Type 1
Topic: Changing injectors... high/low impedance.
Replies: 11
Views: 6864

Re: Changing injectors... high/low impedance.

my tune is set for 444cc injectors i think there 480cc. how do i change the size in nistune
i think there bosch 036.
dont know if this is the right place to post