Search found 91 matches

by HermaN
Sat Oct 08, 2011 12:07 am
Forum: Type 3/4/5
Topic: Target AFR values in fuel map?
Replies: 3
Views: 2412

Re: Target AFR values in fuel map?

As PL suggested, have you properly setup your injectors and setup the K-value? If so you should not need to add so much fuel to the map to get the readings you want. Could also be 1 or 2 cylinders running lean due to bad/clogged injector(s) which means to get a good average reading of all 4 you need...
by HermaN
Sat Oct 08, 2011 12:01 am
Forum: Type 3/4/5
Topic: wot load on idle?
Replies: 5
Views: 2578

Re: wot load on idle?

Yup, as above, it's reading 0.78v in the first pic and 2.8v in the 2nd pic, so the MAF is seeing a larger airflow than there actually is which it determines as high load on the engine. It's probably bogging down due to the ECU injecting more fuel than it should be due to thinking there is more air e...
by HermaN
Sat Oct 01, 2011 1:54 am
Forum: General Nistune Discussion
Topic: Greetings from Zagreb!! ..and few questions about sharing..
Replies: 2
Views: 2043

Re: Greetings from Zagreb!! ..and few questions about sharing..

Yes, uploading maps & logs files for advice is allowed here. Are you the same Ozi as on SXOC? Post your map and logs and tell us what trouble your having and we'll try and help you out.

:)
by HermaN
Thu Sep 29, 2011 9:38 pm
Forum: General Nistune Discussion
Topic: Z32 MAFs
Replies: 5
Views: 2858

Re: Z32 MAFs

Will do mate. Aye, export them to me for a good price and we can share the profits. ;) :p haha
by HermaN
Wed Sep 28, 2011 7:50 pm
Forum: General Nistune Discussion
Topic: Z32 MAFs
Replies: 5
Views: 2858

Re: Z32 MAFs

Sweet, cheers guys. @ PL, a brand new one here is around £500, where as this used one is £80 + delivery.....

Also the guy is testing it today and putting up pics of it before I buy it, buying it from a guy on the 300ZX owners club in the UK.
by HermaN
Wed Sep 28, 2011 9:47 am
Forum: General Nistune Discussion
Topic: Z32 MAFs
Replies: 5
Views: 2858

Z32 MAFs

I am on the look out for a Z32 MAF and have been offered one at a good price from a 1991 Z32 N/A, after a bit of searching some people are saying these are the same as the Twin Turbo MAFs. Can anyone 100% confirm if these are the same? We need a MAF capable of over 400 BHP and compatible with NIStun...
by HermaN
Wed Sep 28, 2011 4:47 am
Forum: General Nistune Discussion
Topic: so, heres a novel idea!!!
Replies: 22
Views: 12062

Re: so, heres a novel idea!!!

well lets see, -i helped swap a 7mgte into my 7m body -owned and pretty much worked on a z32tt -attempted to swap a 4g63t engine into a mitsu expo(failed cause i had the wrong tranny) -had a short stint with a suby impreza -brought,swapped,modded a n/a 89k original mile 240sx that was a auto(now a ...
by HermaN
Tue Sep 27, 2011 4:40 am
Forum: Software Bugs
Topic: A couple of issues :: v. 10.12
Replies: 4
Views: 2528

Re: A couple of issues :: v. 10.12

What cable are you using? I had LOTS of dropping out issues on 1 car when it was running with an ECUtalk cable, switched to a PLMS cable and been fine since. Was quite strange as the ECUtalk one was perfect on all cars I mapped except this one. Been using the PLMS one with zero issues since, and the...
by HermaN
Mon Sep 19, 2011 12:13 am
Forum: General Nistune Discussion
Topic: so, heres a novel idea!!!
Replies: 22
Views: 12062

Re: so, heres a novel idea!!!

It's not that they can't do e-mail tuning, it's just that you can't properly map a car via e-mail tuning. Personally the most I will do for someone over e-mail is provide them with a base map so they can safely drive their car to a tuner. I would never want to map car over e-mail.
by HermaN
Sat Sep 17, 2011 9:44 pm
Forum: Type 3/4/5
Topic: New to Nistune & issues!
Replies: 21
Views: 8067

Re: New to Nistune & issues!

As Matt said, that is not a resistor that has burnt out, that is a driver circuit which is usually used to run the injectors or coils.
by HermaN
Sat Sep 17, 2011 9:36 pm
Forum: Type 3/4/5
Topic: Daughterboard compatibility?
Replies: 8
Views: 3355

Re: Daughterboard compatibility?

How do you order from them? GRID accept PayPal, they have no order info on their site. Also, does anyone know where to get R33 GTS-t boards or R34 GT-R board from Japan?

Sorry to hi-jack the thread.
by HermaN
Sat Sep 17, 2011 8:46 pm
Forum: Software Bugs
Topic: NIStune 0.10.12 bug
Replies: 17
Views: 8138

Re: NIStune 0.10.12 bug

Hi! The problem has a simple solution. 1. Go to the VQ Maps folder. 2. Look for a file N13_CA18DE_VQ_Map 3. Rename this file to N13_CA18DE_VQ_Map.bin I'm writing this from memory, as far as I remember the VQ-Map-File had no or the wrong extension. That solved it! You were right, the file had no ext...
by HermaN
Fri Sep 16, 2011 4:35 am
Forum: Software Bugs
Topic: NIStune 0.10.12 bug
Replies: 17
Views: 8138

Re: NIStune 0.10.12 bug

Unticking the box only stops it happening on startup, but if I manually open a ROM file I still get the error. From the error above it is not do to with looking for a ROM that does not exist, it is looking for a VQ Map file in the installation folder that it can not find for some reason. It's a clea...
by HermaN
Thu Sep 15, 2011 4:35 am
Forum: Software Bugs
Topic: NIStune 0.10.12 bug
Replies: 17
Views: 8138

NIStune 0.10.12 bug

Just downloaded and installed the latest version of NIStune (0.10.12) with the latest ROM Pack (2.3.1) and every time I open any ROM (my own tunes, or the ones in the ROM pack) I get the error..... " Check C:\Program Files\NIStune\VQ Maps\N13_CA18DE_VQ_Map.bin exists or is not already open, &qu...
by HermaN
Thu May 12, 2011 12:09 am
Forum: General Nistune Discussion
Topic: KS4 sensor location and tapping signal wire question
Replies: 6
Views: 3129

Re: KS4 sensor location and tapping signal wire question

The KS-4 signal wire is shielded and you should not be picking up any electrical interference. Mine only picked up electrical interference after it got damaged. Accidentally closed the bonnet and the wire got trapped in the hinge.