Search found 22 matches

by J30_VG33ET
Wed Apr 08, 2009 5:18 am
Forum: General Nistune Discussion
Topic: Nistune Maps users guide
Replies: 10
Views: 4654

I had some time to go through the document and appended some notes. Hope they help. Let me know if you can't read them, I did the edits in Preview, but can see them in Acrobat at work.

Overall a fantastic resource, and clearly setting this product above the market.
by J30_VG33ET
Wed Jan 21, 2009 5:01 am
Forum: Software Enhancements
Topic: Automated Power Balance Test feature Suggestion...
Replies: 5
Views: 3354

Just a suggestion: if the authority were available, it seems like a good idea to not only fix ignition timing and AFR thru the testing process, but also raise the idle speed sufficiently to get beyond variability induced by big cams and insensitive MAF's. The software could drive the IAC motor all t...
by J30_VG33ET
Tue Jan 20, 2009 3:04 pm
Forum: General Nistune Discussion
Topic: USB hub for NIStune & WBO2 inputs?
Replies: 2
Views: 1848

USB hub for NIStune & WBO2 inputs?

Has anyone tried using a USB hub to collect the signals from NIStune and their WBO2 into a single cable heading for the laptop?

Ideally I'd like to have a powered hub behind the dash and just have to connect a single cable when tuning.
by J30_VG33ET
Tue Jan 20, 2009 2:51 pm
Forum: FAQs
Topic: Converting Datalogged load to Scaled Load (Tp)
Replies: 6
Views: 6122

I noticed that you added this to the log file. Could this be a separate column so the data can be sorted (easily)? It's kinda a pain to manually strip the [] from the Tp values.

Maybe call it TP (MSB), like MAF (LHS).
by J30_VG33ET
Tue Jan 20, 2009 2:46 pm
Forum: Software Enhancements
Topic: enhancement for afr trace table
Replies: 3
Views: 2632

That'd be awesome to not have to play back the logs to populate the graph!

Matt, could you also look into adding the ability to plot AF Alpha and Timing to this tool?

Also, what are the units getting plotted...? Is it supposed to be AFR/100?

Thanks!
by J30_VG33ET
Tue Jan 20, 2009 2:25 pm
Forum: Zeitronix
Topic: Zeitronix Support Added
Replies: 24
Views: 25916

Turns out I've been having some connectivity problems too, with both the NIStune and Zeitronix. I tried re-installing the FDTI drivers, unplugging and replugging the USB cables, trying different cables, etc. Usually after 10-15 minutes of fiddling and rebooting the laptop it connects. Once connected...
by J30_VG33ET
Tue Jan 13, 2009 4:38 pm
Forum: General Nistune Discussion
Topic: Knock Detection systems
Replies: 27
Views: 16165

What about the J&S Knockguard? Anyone use this unit? It promises much more performance, like actually retarding the timing per cylinder, etc...
by J30_VG33ET
Fri Jan 09, 2009 2:45 pm
Forum: Type 1
Topic: Gear Fuel map RPM switch?
Replies: 1
Views: 1550

Gear Fuel map RPM switch?

Unit: '91 J30 ecu I've observed that the ECU doesn't switch to the gear map until 3k rpm (80ish mph) in 5th. I tested this by filling the fuel map with 14.7 and the gear map with 12.7. I'm sure the second fuel map is the gear map as I can spin up to 90mph in 3rd and 4th without going rich. This also...
by J30_VG33ET
Fri Jan 09, 2009 2:28 pm
Forum: Type 2
Topic: Z32 mapping questions
Replies: 2
Views: 1877

Z32 mapping questions

On the stock Z32 fuel maps, they go leaner than stoich (15.xx) for most of cruise. Is there a reason for this? Better MPG, some EGR thing, etc.

Has anyone changed this (richer/leaner)? Why? Like the results?

Just noticed looking over the calibration and was curious.
by J30_VG33ET
Fri Jan 09, 2009 2:23 pm
Forum: General Nistune Discussion
Topic: 0.9.3 available - beta version
Replies: 9
Views: 3512

modulation wrote:With the new version, when I log my AFR's they show up properly, however when I play the log back they show up as lambda? on the AFR 3D trace table and as a whole number on the log player (I.E. 13.00) never any number in decimal places besides .00.
I'm getting the same thing with a Zeitronix.
by J30_VG33ET
Fri Jan 09, 2009 2:19 pm
Forum: Type 1
Topic: Error tuning fuel map, "Invalid Write Address".
Replies: 4
Views: 2193

Sorry Matt, but still having errors.
by J30_VG33ET
Mon Dec 08, 2008 8:20 am
Forum: Hardware Enhancements
Topic: Data Logging Module
Replies: 8
Views: 7658

So does the ECUtalk work with non-Consult (Type1) NIStune boards through the Consult eXtend protocol (USB port)? I didn't think that was the case. MichaS14a, if you could figure out how to communicate with the serial data coming off the Zeitronix, you'd have WBo2, boost, EGT, 5v user input & RPM...
by J30_VG33ET
Fri Dec 05, 2008 3:25 pm
Forum: Hardware Enhancements
Topic: Data Logging Module
Replies: 8
Views: 7658

Data Logging Module

This isn’t so much an enhancement as an additional product. Often I don’t want to have the laptop in the car while “testing”. It’s awkward, expensive, etc. Also, there are times when I’d like to log some sensor data out of the blue (engine’s knocking for some reason, running funny…). And lastly, you...
by J30_VG33ET
Sat Nov 22, 2008 1:05 pm
Forum: General Nistune Discussion
Topic: MAF position: Draw-thru vs. Blow-thru
Replies: 9
Views: 6256

Was the plumbing similar? Specifically the lead-in and discharge from the meter?

Anyone else out there have any experience?
by J30_VG33ET
Sat Nov 15, 2008 11:40 am
Forum: General Nistune Discussion
Topic: MAF position: Draw-thru vs. Blow-thru
Replies: 9
Views: 6256

MAF position: Draw-thru vs. Blow-thru

I was hoping to get some input from the group on actual experience running and tuning one layout vs. the other. There are plenty of opinions out there... How about some good data? Anyone tuned back-to-back configurations? How did your calibration change? Did the MAF reliability vary?

Thanks.