Nistune Forums

I think I sort of found my answers with correct keywords ("Detonation Ignition Retard"), so I guess it didn't need to be answered more than once. About "Knock maps" (It's a "04Uxx" R32 RB20DET ECU) - http://forum.nistune.com/viewtopic.php?f=8&t=1938&p=13672&...

I wanted to confirm the procedure for turning knock control off with R32 RB20DET ECU. I understand that by copying the main ignition and fuel maps to knock ignition, fuel maps, that it will turn the map part off. But how do you turn the "Knock Timing Beta Advance vs RPM" table off? I can't...

Did you check at battery???

I had a problem with low voltage on turbo timer and found out there's around 1V difference from tapping into wiring near ECU to testing voltage at battery.

Thank you for the answer Matt. :) In NZ this American drifter had a 10.1"? screen Android Tablet PC with bluetooth running off a LS1 stock ECU in a Rx7. Mainly used to display gauges, etc. That's what sparked my interest in this subject. Was just wondering if it's possible with Nistune, but use...

Thank you for your answer to my questions Eric. :) I see what you mean, wideband software, Nistune tuning software. Maybe Emachines E350 netbook PC with Windows XP might be the best option? - http://www.harveynorman.ie/emachine-e350.html I think has USB 2.0 ports x3 for PLMS cable, wideband and one ...

PC for tuning + gauges What would be the best to use for tuning, displaying gauges like MFD in a R34GTR or R35GTR and can be removed from car? Emachines Netbook PC or Android Tablet PC with skin cover + keyboard? Android Tablet PC - http://www.lightinthebox.com/wholesale-Computers_c213?currency=EUR&...

Reytec ECU.

Oh, so your saying it's similar to Link ECU board (map sensor) that fits into stock ECU casing???

Interesting subject.

Tomei were able to get MAP sensor, IAT sensor, Barometric sensor to work with stock GTR ECU and it works. Same with SR20DET ECU. Also they have base ROM data for SR, RB26 that you can download to load onto their ECU's.

I assume direct from Ford Racing Division or through Ford dealership. Read this thread about aftermarket Ford Lightning MAF and genuine Ford Racing Lightning MAF - http://forum.nistune.com/viewtopic.php?f=12&t=1694&start=0 I gather the part number in link below is for a genuine Ford Racing L...

Modified stock ECU with Nistune can run a 700hp rated Ford Lightning MAF (check drop down menu when changing MAF, as Ford Lightning MAF is listed there) in blow through setup (mounted on intakepiping after intercooler, but before throttle body). There are weld on mounts, so Ford Lightning MAF sensor...

Thanks.

Installing the previous version (0.9.14.2) solved the problem.

Descripition of problem : Software Version 0.9.14.7 While using HCR32 address file and any HCR32 bin file. "O2 feedback temperature" that's shown seems incorrect, as it should be 30degrees (was in previous versions of software) and it displays as 205degrees. This is important for tuning my...

Interesting subject. TPS is there to stop lean condition (results in stumble when suddenly accelerating / during transient movement) when throttle body or throttle body's suddenly open, It's why a TPS is mounted on the throttlebody. TPS settings are usually played with after fuel maps have been tune...

(a) With a problem description Version 0.9.14 Build date: Mar 1 2010 Nistune Program crashes when selecting Display > Consult Active Test (b) Exact error message (if any) (Vista operating system) Nistune MFC application has stopped working. (c) Vehicle type (and what Address file you used) Doesn't m...

Need USB drivers. If you buy PLMS USB cable (works with Nistune tuning software), it requires that you install the USB drivers from link below, before installing Nistune tuning software, etc (follow PDF installation guide, don't miss a step) - http://www.plmsdevelopments.com/usb_drivers.htm With PLM...