Nistune Forums

here they are the map is test modded at the track , now i have another one with last column modified richer,but this one i used for the logs.didn't tested the new one because my gearbox is out for torque converter modification. the log is from testing stall speed on a different torque converter , bu...

i had this problem also with a Q45 MAF and big T04ZR turbo. first , i think your 3" tube is too small. try 3.5" for MAF housing but not 4" ( i have tried myself and is too big ). you will have to adjust manualy the VQ table after you have a correct K and latency. second , you can run ...

rb25det engine with z32 ecu , 80mm throttle body , 3" intercooler piping , custom made large intake plenum , big T04ZR garrett turbo , Q45 AFM before the turbo... i have a very lean condition when depressing the gas fast ! i am thinking that is because my setup being very large in air volumes ,...

is it possible to update to new version but keep the "old" look style ? or at least some feature to have bigger icons ? when using a small netbook and also driving with a stiff suspension is almost impossible to see the small icons and also the consult/AFR connected flash cursor . i know i...

again perfect feedback and support !!!

great job , i will update to .15 and see how it works !

great to hear from you matt !

thanks !

testing VTC and connected in tunner mode doesn't red flag the VTC on consult diplay. connected in logger mode it shows perfect when on and off.
is this right ?

seems that input tracer doesn't filter the TPS and SPEED. 1. when i select to show let's say from TPS 0.5V and check the box , nistune shows also values under 0.5 TPS even if TPS is red flagged ! 2. same thing with speed trigger , doesn't care what value you put and tick the box , it doesnt filter s...

1. in the past did have a sort of problem like this , also on rb25 but with 300zx ecu. try to clean the electric idle control valve in the back of intake plenum. if that is clogged and don't open how it suppose to , it will be very rich at idle ... 2. also check the TPS voltage settings in nistune a...

ok , i understand . that's why in older version i could see it even if it was not functional . i didn't trust in nissan knocking and made up ear cans and i could listen very well to the engine noise . when i have worked on the mapping i heard the pinging of the engine in different situations and the...

yes , already done that , but no luck ! there is no knock counter to check in registers and everything related to ignition is checked...

thanks

hey matt i am not sure it is a bug...but on 0.10.12 it doesn't appear to log knock counting anymore? and no display of it when playback the log file? rb25det engine with z32 ecu , adr file i am using is z32 256 for rb25 . with older version of the nistune i could see the knock counting. i want this ...

thanks pl first of all from my understanding to read the high gear fuel map you need to play with one parameter. in my case this is set to 0 , because i have the z32 ecu and the rb25 transmission and from this reason the stock value doesn't work in my case and i need to play with it. in the future i...

i am interested if there is a simple way to force the ECU to read the knock timing map from a push button ! ground the knock wire or something similar ? i need this for setup the launch control . at this moment i am at 4500rpm when l/c is active and i make 0.16 bar of boost standing at the line. log...

1. in both versions doesn't work the log recorder anymore ... still plays the old logs.

2. in both the name for DLP is not showing like AFR , MAP ,EGT ... only aux1 , aux2 , aux3...

anyone know what is all about ?

thanks