Nistune Forums

tank you matt

Hi matt tank you for you reply but i am really sorry, i dont understand wy i need to adjust k and tim. i read 3 times all manual, try to view tuning video but :roll: dont understand, i think its du to my english level sorry. Maybe you can rephrase it with example please :) ? ajusting TIM will make m...

Hello, i finnaly buy this one for ampli https://www.amazon.fr/gp/product/B08CXZVT7K/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 this one for microphone https://www.amazon.fr/TOOGOO-Capsule-Microphone-Condensateur-Electret/dp/B00K67WRCG/ref=sr_1_11?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&...

hello i make my first run this weekend, all seem good Tp in cruise is about -1/+1 But when i controle my crank position, on the car it is 15° and on nistune it show 10°, the only situation that i can have 15° is only when i accelerate a bit, when it return to idle nistune show 15° during 10-15sec an...

hello, jaycar doesn't delivry to fance , can you give the the spec for that part to find an equivalent in france ,

tank you

Hi matt, tank you for your reply. i think i will stop my tuning to 0.8 bar first to have less thant 300hp because of the stock MAF. i am not sure to understand your last answer "If load exceeds that in the maps, you can reduce K (lower load reading) and increase TIM to offset fueling" this...

hi everyone, i am florian from france, sorry if my english is not perfect. in my previous topic i find which ROM add to my new used ecu with nistune. my config: forged piston cp 8.5:1 / forged rod / TOMEI ARMS SR M8270 ( actual 0.8bars because my last ecu have a stage 1 horsman ) / Big FMIC / 255lh ...

Hi matt, tank you for all, i will test the rom this weekend and start to tune the car.

hi everyone,

i check the forum and find that i have 2 option, re sync my nats or i burn the s15 JDM rom. are you ok with the second option ? sympliest for me ?

tank you

Hi, i try to dowload the 82F0G ans the car start but cut after 5 secondes

hi, i have only to download the 82f0f version ?

tank you

hi matt,

my board is an 82F0F read by nistune more other i have 1 error message with the NATS !!
please see below the screenshot

to make the ecu usable on my s14a i need to pass throu base image programmer ? right ?

tank you

Hello, i am florian from france, i have a s14A that i have completly rebuild myself :) and have a question about nistune. i buy a s14A ecu with a nistune and want to work with it on my car but this ecu was used on a other car before so i want to reset it, i try to find ont the worshop manul from nis...