Search found 57 matches
- Thu Nov 05, 2020 3:34 am
- Forum: Innovate
- Topic: LM-1 no connection
- Replies: 5
- Views: 2907
Re: LM-1 no connection
The issue is solved now. On my laptop I have Logworks 3.07 and this works with the LM-1 and Windows XP. On the desktop I downloaded the last version of Logworks which is the 3.38 and this doesn’t work with the LM-1 and XP. I installed 3.07 on the desktop and it’s fine with both the COM port and the ...
- Tue Oct 27, 2020 10:07 pm
- Forum: Innovate
- Topic: LM-1 no connection
- Replies: 5
- Views: 2907
Re: LM-1 no connection
Hi Matt, I'm not much further yet. I posted the issue on the contacts page of the Innovate website and a friendly chap from Autometer.com replied that There unfortunately is not a way to get your Windows 10 computer to talk to the LC1. That might explain the issue with my W10 desktop but not with th...
- Mon Oct 19, 2020 2:42 am
- Forum: Innovate
- Topic: LM-1 no connection
- Replies: 5
- Views: 2907
LM-1 no connection
Hi folks, I will need my Nistune board in the near future but I’m having trouble with my Innovate LM-1 controller. The only setup where it is possible to connect to a PC is on my old laptop COM1 port. As I would like to replace that with a new one, I started testing the LM-1 on another PC at home. I...
- Sun Nov 17, 2013 8:03 pm
- Forum: Type 1
- Topic: CA18DET TPS voltage
- Replies: 5
- Views: 6223
Re: CA18DET TPS voltage
If I remember correctly, there are same era TPS with movement direction opposite to CA18's..... RB20's ? Thanks for this info. I'll try to find out about these. Meanwhile I found there was some play on the drive because the flat shaft didn't go deep enough into the TPS housing. I fixed this and now...
- Thu Nov 07, 2013 10:36 pm
- Forum: Type 1
- Topic: CA18DET TPS voltage
- Replies: 5
- Views: 6223
Re: CA18DET TPS voltage
Hi Matt, I didn't drive the car yet so I don't know how it reacts. These two parameters that you mention are they dependent on throttle position or on throttle movement ? In the first case I should perhaps worry and try to fix, in the second I can give it a try and see what it gives while driving. T...
- Thu Nov 07, 2013 7:41 am
- Forum: Type 1
- Topic: CA18DET TPS voltage
- Replies: 5
- Views: 6223
CA18DET TPS voltage
I recently replaced my engines Throttle Body by a larger (Chinese ebay) item. It rotates in the other direction so I had to modify the TPS sensor. For the potmeter part this was rather simple, just swapped the two outer pins in the plug. But the ECU also wants to know when the throttle is closed and...
- Mon Feb 22, 2010 8:26 am
- Forum: General Nistune Discussion
- Topic: Windows 7
- Replies: 8
- Views: 4584
- Sun Oct 04, 2009 1:42 am
- Forum: Type 1
- Topic: Question on CA18DET ECU + Nistune
- Replies: 7
- Views: 3998
- Wed Jul 15, 2009 9:49 pm
- Forum: Type 1
- Topic: speed sensor voltage
- Replies: 19
- Views: 10688
- Wed May 20, 2009 5:11 am
- Forum: General Nistune Discussion
- Topic: NIStune Version 0.9.3.6 available
- Replies: 32
- Views: 10350
- Fri May 15, 2009 12:40 am
- Forum: General Nistune Discussion
- Topic: NIStune Version 0.9.3.6 available
- Replies: 32
- Views: 10350
- Wed May 13, 2009 5:32 pm
- Forum: General Nistune Discussion
- Topic: NIStune Version 0.9.3.6 available
- Replies: 32
- Views: 10350
Re: NIStune Version 0.9.3.6 available
"Loading sync into empty ROM file" is not clear to me.Matt wrote:- Added missing maps indication when loading sync into empty ROM files (orange highlights)
I have the "TP Load Limit" highlighted with a bin file that didn't do that on a previous version.
Should I worry?
- Wed Apr 08, 2009 9:48 pm
- Forum: Type 1
- Topic: speed sensor voltage
- Replies: 19
- Views: 10688
Re: speed sensor voltage
as im adding a speed sensor to my car, does the speed sensor signal need to be a 12v, 5v or ground signal? I'm confused by this question. Most obvious answer is that it depends on where you're goung to send that signal to. But that might not be the answer that you were expecting... is there 5v avai...
- Wed Apr 08, 2009 4:57 am
- Forum: Type 1
- Topic: Knowledge Share Ca18DET.
- Replies: 18
- Views: 11995
Z32 AFM and 440cc injectors. Stock ECU with Nistune type 1 board. LM-1 wideband O2 sensor. Volvo IC and rad. Electric fan. The exhaust is a 2.75inch Mongoose. Fuel pump is Walbro. Nissan pistons +0.5mm. ACL bearing shells. HKS metal HG. Balanced pistons, rods, crank, flywheel and front pulley. Mobil...