Nistune Forums

Short Story : Works!!! Long story, upload the oem map, Only scale MAP. Turn On and nothing.... Put Cranking in 2ms , soo rich, but start.. Use the Inyector multiplier, Oem was 100%, put 48% and the car Star , run smooth, idle by herself. So , for this, is solved. Now is time to continue tunning, tom...

Crank enrichment is one of those values which the ECU calculated only when the START signal is seen by the ECU. The ECU will only use the CRANK ENRICH and CRANK TIMING tables So firstly make sure the ECU is showing START signal in the Consult View panel when you attempt cranking Yeap, the Start Sig...

Hi, I have this problem Engine : CA18DET with 820 injectors, z32 maf. Nistune : oem table , with resize injector and scaled maf and set the rev limit to 6000 rpm (brand new engine) First runs work fine but then when car turn off don’t turn on, (cold or hot is the same). Remove the inyector clips, tu...

Try to donwload, burn or upload says "consult is not connected" You missed a vital step.... actually connecting to the ECU. Please press the 'consult' button in the top panel (2nd from right) to connect before attempting to do anything If still an issue after this then please do a debug l...

Hi cmbz i do this, also recheck all welderings and connections same thing

i try on DLP and he saw the ecu, but nistune still cant connect.

Hi, im newbbie with this, so.. i try to make so explicit. I do this: 1) Install Nistune on ECU 2) Install Nistune on PC Win 10 3) Check Drivers, is fine, windows take "type 1 board" when car is Ignition On and engine OFF. Try to donwload, burn or upload says "consult is not connected&...