Search found 22 matches

by r324u
Wed Aug 07, 2019 4:08 am
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

Hmm that's odd that it still doesn't work even though the fix was done before that, Do you have any suggestions I can tell the dealer or parameters that need to be enter rb20for25 ac vct manual is the map I use to get the vct light to illuminate
by r324u
Sat Aug 03, 2019 2:59 pm
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

nope it wont show in either, I have two boards swapped one another out and neither would work. I had them flashed around august 2018, do you know if the fix was after this or before it, just curious thank you for your help
by r324u
Sat Aug 03, 2019 1:59 pm
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

So i did make sure all those channels are ticked when i connect, vct still activates but their is no light, im guessing i have to get my board re-flashed??
by r324u
Thu Aug 01, 2019 2:26 pm
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

I have the board setup for ac out, light still doesn’t work I am going to send it back to the distributor and have him flash it again.
by r324u
Wed Jul 31, 2019 1:39 pm
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

Matt wrote: Wed Jul 31, 2019 12:28 pm Also make sure in Consult Channels Digital Control register 1,2 and 3 are enabled. If older firmware, reflash the board with what I attached

what exactly do you mean enabled ? where do I do that?
by r324u
Wed Jul 31, 2019 1:08 pm
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

the a31 file for rb25 will work on my hcr32?
by r324u
Wed Jul 31, 2019 12:18 pm
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

ok I verified I have latest and I still don’t get it to light up, it clicks but does not light up ?
by r324u
Mon Jul 29, 2019 12:10 pm
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

Re: hcr32 rb20for25 vct question

I believe I am running the latest firmware, I am going to try and start fresh and just copy over my tune, maybe that will help, Worse case it works and the light doesn't activate no big deal, thank you for your quick reply as always. I am loving the new gauges and such!
by r324u
Mon Jul 29, 2019 4:09 am
Forum: Type 2
Topic: hcr32 rb20for25 vct question
Replies: 17
Views: 2392

hcr32 rb20for25 vct question

I recently had the ecu pinned bridging the a/c 9 to pin 113 to activate the vct on my rb25det neo, I have it successfully activating( cut) @ 1100 and recover at 5900, my questions is that on the consult view the vct never shows it activating even though mechanically it will with no issue, not sure i...
by r324u
Thu Aug 23, 2018 9:14 am
Forum: General Nistune Discussion
Topic: Nistune Vs. Haltech
Replies: 2
Views: 2694

Re: Nistune Vs. Haltech

You're very welcome!
by r324u
Tue Aug 21, 2018 10:44 am
Forum: General Nistune Discussion
Topic: Nistune Vs. Haltech
Replies: 2
Views: 2694

Nistune Vs. Haltech

I recently had an issue with my ecu that was nistuned, I used it for over a year and loved it. I had an issue finding another stock ecu so I jumped the gun an bought a Haltech plug and play (1300usd).It showed up and I plugged it in, got the car running after a bit of research. Throughout using it, ...
by r324u
Wed May 30, 2018 3:36 am
Forum: Type 2
Topic: Rough Cold/ Intial Start Rb25det Neo
Replies: 6
Views: 1470

Re: Rough Cold/ Intial Start Rb25det Neo

That would be cool, however I think its just not worth it, Sensor barely fits and requires a tad more work and seems to be very touchy from my experience. Could have been that leak as well but looking forward to upgrading to better platform 3" or 3.5".
by r324u
Sat May 26, 2018 3:44 pm
Forum: Type 2
Topic: Rough Cold/ Intial Start Rb25det Neo
Replies: 6
Views: 1470

Re: Rough Cold/ Intial Start Rb25det Neo

Spoke to pmas directly, It is designed that way to prevent corrosion. However now that i moved on from that, I decided to do another boost leak test to make sure nothing else was leaking, I found that there was a pin hole in one of the welds directly where the mas sits, Well i think this is positive...
by r324u
Fri May 25, 2018 12:00 pm
Forum: Type 2
Topic: Rough Cold/ Intial Start Rb25det Neo
Replies: 6
Views: 1470

Re: Rough Cold/ Intial Start Rb25det Neo

Sorry I couldn't post the bin, I was at work and didnt have access to it. But will include it in this post. So i tried a few things today and seemed to have better luck. 1.Loaded new map from start 2.Changed maf with vq generator 3.changed injectors from 380-550, unticked tim and unticked crank 4.Ma...
by r324u
Thu May 24, 2018 11:51 am
Forum: Type 2
Topic: Rough Cold/ Intial Start Rb25det Neo
Replies: 6
Views: 1470

Rough Cold/ Intial Start Rb25det Neo

I have been going back and fourth sometime now trying to figure out this cold start issue, It will crank and crank and then it will eventually start and the afrs go from about 9.0 up to 14.7 and will stay running without an issue. Almost immediately after I shut the car down (even when warm) and try...