Nistune Forums

Matt,

sorry about the tardiness of me getting this fixed, i've been extreemly ill and hospitalised for a wee while, i'm getting back to my feet now so will get onto this asap and check whats noted above.

Thanks

Mark

Hey

I supplied a BIN file from my current ECU that was already set up for 444cc injectors so should i change the injector size in the .adr file from the stock 370 to 444?

Its arrived, quite a neat little package.. very impressed. Suprise to find that there is no external control box and they've managed to fit all the electronics inside the guage housing, nice :) Will slap it in this weekend I hope. Matt, if your going to send me stuff to get the data from it can you ...

Ok, will probably be in the week sometime when I can get to check this stuff. I'll report back once I have.

I've just checked J4 on the board with a magnifying glass and it looks just fine, but I'll retouch the solder anyway to be sure.

Mark

Thanks for putting those photos up. Some things you can recheck - Reflow the solder on the four connector pads going to the ECU connector plug so that solder flows all the way through the holes No Problem, I was cautious of applying to much. - Clean the solder flux around the bottom of the EPROM ch...

Update. Deinstalled the older release version of nistune, ran the driver cleaner and set about starting again. Still nothing coming down the USB, laptop doesn't even ask for drivers. Tried the GF's (XP) laptop incase it was mine with the same result. Rechecked everything and can't see anything visib...

Ok, I used the latest release version so thats probably the vista issue at least

I'll download the BETA later and also take some pics inside the ECU and pop them up.

Thanks

Mark

Ok.

I've ordered one so I'll let you know once I've got it up and running. I've also ordered the optional EGT probe to go with it.


Mark

Recieved my Type1 Board for my ECU yesterday and set about getting it installed today. My ECU is already 'socketed' so there was no worries with that. Followed the install guide and soldered the 4 tails into the ECU mainboard and popped it all together and into the car. On putting the ignition on I ...

Matt, this will likely be the wideband I buy as its well supported (and very reasonable in price when purchased with the EGT probe too).

I'd be happy to help with data if you think you can get it running?