23710 80f00 board in a 2371M-91f05 ecu

stiv · Post by **stiv** » Mon Apr 27, 2009 9:03 am

If i was to put a 23710 80f00(jdm s14a sr20det) board in to a 2371M-91f05(jdm s15 sr20det) ecu, would it work in the s14a?

The ecu from the jdm s14a got damaged and i'm having problems getting another, but have 2 ecu's from s15's, i think the pin outs are the same

Matt · Post by **Matt** » Mon Apr 27, 2009 11:20 am

you can try it out and see

I know the ROM images run in these ECUs and the hardware is virtually identical so I cant think of any reasons why it wouldnt work off the top of my head

Matt · Post by **Matt** » Sat May 02, 2009 10:50 pm

i tried it out last night when another customer had similar issues

S14A in Type 4 board will not run in S15 ECU... it goes limp. You may need to source another S14A ECU from wreckers/ebay etc

stiv · Post by **stiv** » Tue May 05, 2009 10:11 am

the car would start and run on the base map but the car would not talk to the ecu, consult wouldn't connect. the car is running 850cc injectors and E85(85% ethanol 15%petrol) so didn't sound to good and was shut off. was going to try it in an s15 to see if i could get the consult to connect, would there be much point?