Posted: Tue Jan 29, 2008 8:01 pm
Still here!
I need the information from the steps you performed
So you are using a COM port in the back of your PC? Is it COM1 in device manager?
Okay, did you try connecting pin2-3 together on the serial port? You can do this by getting a DB9 connector from an electronics shop which plugs into your PC. You can the solder pins 2-3 together and plug this in
Does teraterm let you connect to say, COM1 of your PC?
If you press keys in tera term, does it 'feedback'?
If so you have a working COM port connecting to teraterm ...
I need the information from the steps you performed
So you are using a COM port in the back of your PC? Is it COM1 in device manager?
Okay, did you try connecting pin2-3 together on the serial port? You can do this by getting a DB9 connector from an electronics shop which plugs into your PC. You can the solder pins 2-3 together and plug this in
Does teraterm let you connect to say, COM1 of your PC?
If you press keys in tera term, does it 'feedback'?
If so you have a working COM port connecting to teraterm ...