Upgraded to 0.9112
I open a previous .bin file, maps load up fine.
The values in the Fuel Table however don't make much sense, but the 3d map looks fine. (see screenshot)
I didn't have any issues before the upgrade.
I am opening an RB20DET bin using HCR32_RB20_256_G.adr
V0.9112 Issues
Moderator: Matt
V0.9112 Issues
- Attachments
-
- 33.JPG
- These are the results I get
- (94.25 KiB) Downloaded 1875 times
-
- Jason-Tweaked_195HP.bin
- This is the .bin file I used
- (32 KiB) Downloaded 129 times
-
Twin-turboZ
- Posts: 43
- Joined: Wed Feb 22, 2006 6:38 am
- Location: Vancouver Canada
V - 091124
Hey matt, after updating to 091124 Nistune intermittently crashes when i try to open a map window (fuel map or ignition map)
Thats strange. That version was quite stable. Please try this out on the 0.9121 version and let me know if the same problem occurs
Send me the address/binary file that you are using and which flags you have set in file-configuration
The newest version which I have been testing with exhaustively in the car during road tests over the last few days is 0.9121 now in the releases directory.
The autotune stuff we are trying out tonight on the dyno with this version since that is relatively new code but appears to function as expected so far (but my fuel map changes didnt appear to affect the AFRs so going to look into that tonight)
Send me the address/binary file that you are using and which flags you have set in file-configuration
The newest version which I have been testing with exhaustively in the car during road tests over the last few days is 0.9121 now in the releases directory.
The autotune stuff we are trying out tonight on the dyno with this version since that is relatively new code but appears to function as expected so far (but my fuel map changes didnt appear to affect the AFRs so going to look into that tonight)