Page 1 of 1
Y34 VQ30DET NEO
Posted: Tue Aug 16, 2016 1:42 am
by tr0jan
Hi. He performed the swap VQ30DET NEO Y34. ECU was old Y33 non NEO. I want to register it in the timing map is for NEO. where to look?
Re: Y34 VQ30DET NEO
Posted: Tue Aug 16, 2016 11:22 am
by Matt
Not sure with question on this? We dont have Y34 ROM file
Re: Y34 VQ30DET NEO
Posted: Tue Aug 16, 2016 11:28 pm
by tr0jan
I think, in NEO, Ignition different card. is not it?
Re: Y34 VQ30DET NEO
Posted: Wed Aug 17, 2016 9:07 am
by Matt
Sorry not sure between R34 NEO timing map and Y34 Cedric timing map
Re: Y34 VQ30DET NEO
Posted: Wed Aug 17, 2016 9:25 am
by Matt
What is ECU part number? Someone sent me CR700 NEO Cerdic file last week which I'm adding in
Re: Y34 VQ30DET NEO
Posted: Wed Aug 17, 2016 11:20 pm
by tr0jan
I put new engine VQ30DET NEO in my car. The previous was VQ30DET (not NEO). I think that ignition angle map in the NEO ecu is different. I have 4p203 ecu in my car now, which is from not NEO engine. I would like to check ignition angle map for NEO engine, to copy them in my ignition angle map if they are different. Matt, can you help me with that?
Re: Y34 VQ30DET NEO
Posted: Thu Aug 18, 2016 11:00 am
by Matt
Only with RB25DET NEO engines
Load up Nistune, select ER34 RB25 vehicle, and then load from ROM_Pack\Type34\ER34 RB25 folder the AA500 ROM file
Look at timing maps in this file using Nistune