Page 1 of 2
EGT sensr what to use?
Posted: Wed Mar 11, 2015 6:00 am
by Bgtym
how to write egt log?
thermocouple type K has a range of 0-54 millivolt = 0-1370 degrees Celsius.
If you connect directly DLP \ BP?
or without the signal amplifier will not work? wrong
http://temperatures.ru/pdf/Type%28K%29.pdf
Re: EGT sensr what to use?
Posted: Wed Mar 11, 2015 8:30 am
by skylinegtrhr
Re: EGT sensr what to use?
Posted: Fri Mar 13, 2015 5:00 pm
by Bgtym
Re: EGT sensr what to use?
Posted: Fri Mar 13, 2015 8:06 pm
by skylinegtrhr
just look for AD595 chip but it is hard to find complete modul with it
, I also did look at this you find but didn't try it please post yours experience when you try it.
and BTW if you also looking for IAT logging this is great and cheap sensor
http://www.banggood.com/Wholesale-DS18B ... 53674.html
Re: EGT sensr what to use?
Posted: Fri Mar 13, 2015 11:26 pm
by Bgtym
I looked AD595, this chip amplification factor is high,
enhances 247 times that the output gives 0-15volt. 0-1270 degrees Celsius.
I will accomplish your goal on the results!
air temperature sensor I use 39340 37100 from Hyundai, this sensor Bosch!
pullup resistor 1K ohm
formula for calculating
Vect = 5000 * Rect / (Rect + 2680) ; where 2680 ohm is OEM ECU resistance between ECT input and +5V.
Re: EGT sensr what to use?
Posted: Sat Mar 14, 2015 12:05 am
by skylinegtrhr
this Facet EPS 1.994.019 is looking very simple to mount on pipes, nice find are you already using it for longer period?
I find it for 13€ do you have any source with good price?
Re: EGT sensr what to use?
Posted: Sat Mar 14, 2015 12:27 am
by Bgtym
skylinegtrhr wrote:this Facet EPS 1.994.019 is looking very simple to mount on pipes, nice find are you already using it for longer period?
I find it for 13€ do you have any source with good price?
in Russia it costs 3.5 dollars))
http://www.ebay.com/itm/SONATA-99-05-TR ... ab&vxp=mtr
Re: EGT sensr what to use?
Posted: Sat Mar 14, 2015 12:32 am
by skylinegtrhr
If Facet is good I'll rather use it as it have metal thread
btw you can look at schematic on page 142
http://www.innovatemotorsports.com/supp ... Manual.pdf
Re: EGT sensr what to use?
Posted: Sat Mar 14, 2015 12:44 am
by Bgtym
excellent manual, the diagram is worth a voltage divider chip after AD595
I thought to do the same,
but I find it easier to buy a ready-made board
Re: EGT sensr what to use?
Posted: Sun Mar 15, 2015 9:13 am
by skylinegtrhr
Hi few more questions
So I presume this is discussion about sensors?
http://turbobazar.ru/showpost.php?s=db6 ... tcount=413
so we can use this lookout table for all Bosch NTC N12 sensors? Fluid and air ?
http://www.bosch-motorsport.de/en/de/pr ... 199317.php
what is source of this table?
Re: EGT sensr what to use?
Posted: Mon Mar 16, 2015 2:59 am
by Bgtym
Bosch 0 280 130 039 analog 39340 37100 Hyundai.
table above that specifically for the Bosch 039
Accordingly, this table is applicable for the sensor 39340 37100 Hyundai
This table is used to control units Bosch!
Re: EGT sensr what to use?
Posted: Mon Mar 16, 2015 3:02 am
by skylinegtrhr
thx I already order sensor so I'll try this ... I also order very similar sensor for oil temp
Re: EGT sensr what to use?
Posted: Mon Mar 16, 2015 2:51 pm
by Bgtym
skylinegtrhr wrote:thx I already order sensor so I'll try this ... I also order very similar sensor for oil temp
what temperature sensor you ordered for oil?
The sensor must be small in size,
which can be screwed into spacer plate oil filters
Re: EGT sensr what to use?
Posted: Mon Mar 16, 2015 8:24 pm
by skylinegtrhr
febi 28381
no never put sensor on spacer it can brake,
Pete had seen some catastrophic results of that,
I always make teflon pipe and mount for this, and for SR you can buy block adapter and completely remove oem filter case and use only remote oil filter
http://www.frsport.com/Tomei-193068-N2- ... _2572.html
Re: EGT sensr what to use?
Posted: Thu Jun 25, 2015 11:29 pm
by Bgtym
thermocouple amplifier
Sensor boost MPX4250
EGT K-type thermocouple
air temperature 39340 37100
the fuel/oil pressure sensor from the device DEPO or any other.