Page 1 of 1
How to link AEM wideband failsafe gauge into nistune ?
Posted: Sat Jun 07, 2014 7:40 pm
by louiswun
I have the AEM wideband failsafe gauge P/N 30-4900 connected via USB on my notwbook, the AEM software can correctly conneected, but in nistune software, there is "AEM Uego AFR gauge" for selection, but after selected AEM, there is no PORT can select, and the AEM AFR cannot be import into nistune, whats need to be do to make it work ?
Re: How to link AEM wideband failsafe gauge into nistune ?
Posted: Sun Jun 08, 2014 11:34 am
by Matt
I've done a bit of looking into it
AEMnet compatible (CAN 2.0)
Differential AFR analog output
Differential boost analog output
Configurable RPM input for logging
One low-side driver output (Ground with 1.5 amp max draw)
Positive-lock connectors
Tunable PC-based software with USB connectivity
Their software is proprietary with the gauge for managing its parameters. It means there is no simple AFR output via USB from what I can see unless you can find documentation otherwise. AEMnet is CAN 2.0 so is a different thing
The only suggestion is using the analog output via DLP USB AD converter and feed this into Nistune. I have a few here from mouser if you wanted one