Page 1 of 6
Nistune Formal Release 1.2.21 [update]
Posted: Mon Dec 30, 2013 3:47 pm
by Matt
Version 1.0
Formal release version
Various crash fixes
Signed Nistune, and driver and installation files
I've fixed various crashes based on reports submitted since the 0.12 versions. This version has signed drivers suitable for Windows 8 and signed installation files so there should be no more driver installation issues or windows warnings now
Happy new year! Will continue looking into Dwell time increase for various ECUs as well as extra features (launch control, flex fuel support at the top of the list for major models)
Re: Nistune Formal Release 1.0
Posted: Wed Jan 01, 2014 7:00 pm
by Topdog781
Hi, Matt is there a way to email us when a update is available out of curiosity? Just to keep up to speed easier.
Re: Nistune Formal Release 1.0
Posted: Wed Jan 01, 2014 8:30 pm
by MJD5SS
launch controlllllllllllllll......
Re: Nistune Formal Release 1.0
Posted: Thu Jan 02, 2014 10:20 am
by Matt
Will be putting in automatic update notifications into the software in future so it will download and update
Re: Nistune Formal Release 1.0
Posted: Thu Jan 02, 2014 6:52 pm
by unreal-
MJD5SS wrote:launch controlllllllllllllll......
Yesss i cant wait for this feature to be available. I wonder if it will be a ignition cut style, or fuel-cut style? (IGN = WW2 in the tailpipe FUEL=Sound like a soft rev limiter, and is std on some of the newer performance cars)
*waits patiently*
Re: Nistune Formal Release 1.0
Posted: Tue Jan 07, 2014 6:36 pm
by Matt
Be fuel cut...
Re: Nistune Formal Release 1.0
Posted: Thu Jan 09, 2014 12:23 am
by gtobyd
I have a U13 XDF that has Tables set up for Gasoline AND E85 if you'd like to have it.
Re: Nistune Formal Release 1.0
Posted: Fri Jan 10, 2014 8:02 pm
by unreal-
Matt wrote:Be fuel cut...
YES!!
Re: Nistune Formal Release 1.0
Posted: Mon Mar 03, 2014 5:49 pm
by Matt
Updates 1.2.1
Add approximate dwell time to gauges. Use in conjunction with dwell time vs volt for larger coils
Re: Nistune Formal Release 1.0
Posted: Mon Apr 14, 2014 12:46 am
by Matt
Updated 1.2.2
Version 1.2.2
Add coil duty log replay
Add extended consult 2 table gauges and support
Add ER34 TP gauge during stream mode. Change consult table ROM location
Add B13 GA16DE ECU support
Add variable size table width for foreign language support
Add handling for consult table download errors
Remove looping reconnects when consult communication fails
Add flex fuel tables and tracing for HCR32, S14/S15 SR20
Flex fuel firmware currently written for Type 2 (HCR32) and Type 4 (S14A SR20DET) for testing. Assuming all goes well then will move to other platforms and combine with Fan Control and Launch control and release ENTs
Re: Nistune Formal Release 1.0
Posted: Tue Apr 22, 2014 9:57 pm
by skylinegtrhr
Matt wrote:
Flex fuel firmware currently written for Type 2 (HCR32) and Type 4 (S14A SR20DET) for testing. Assuming all goes well then will move to other platforms and combine with Fan Control and Launch control and release ENTs
Hi Matt can you update documentation about flex fuel and fan control ?
Re: Nistune Formal Release 1.0
Posted: Wed Apr 23, 2014 12:12 pm
by Matt
Yes once the ECU code has been completed and released. Currently I'm still testing flex fuel on my S14 and several others later this week. Launch control code is being done for S13, S14A and then HCR32 in the same firmware updates and tested
Re: Nistune Formal Release 1.0
Posted: Wed Apr 23, 2014 7:08 pm
by raddy
Sorry for stupid question, but what exactly flex fuel means?
Thanks for explanation
Re: Nistune Formal Release 1.0
Posted: Thu Apr 24, 2014 5:56 pm
by Matt
Flex fuel sensor to run between 98 and E85 (tune adjusts based on ethanol content). More information if you google
Re: Nistune Formal Release 1.0
Posted: Fri May 02, 2014 3:37 am
by supersayianjim
yes iam also hungry for this to work. so if it works for the r32 this will work with the r33 with vvti right??