What injectors can be used with the CA18DET ecu? PNH, saturated or both?
Would a saturated ID1000 high ohm work if I remove the resistor pack?
Peak n' hold or saturated? (CA18DET)
Moderator: Matt
Re: Peak n' hold or saturated? (CA18DET)
Normally Nissan ECUs use peak and hold injectors. However ID1000s have been used successfully (and recommended) for SR20s so I think they would work fine with CA18DET also
-
BeerBringer
- Posts: 5
- Joined: Mon Jul 26, 2010 4:53 am
Re: Peak n' hold or saturated? (CA18DET)
Did some research.
A resistorpack is used on the stock injectors to "fooling" the ECU to thing we use saturated injectors when infact we are using P&H.
I ordered EVO 8/9 FIC1100 saturated injectors and removed the resistorpack.
I have not driven the car yet but it idels fantasticly well! Better than with the 560 cc Evo injectors.
I set the K-constant for 952 cc injectors (1100cc run at 2.5 bar fuel pressure).
A resistorpack is used on the stock injectors to "fooling" the ECU to thing we use saturated injectors when infact we are using P&H.
I ordered EVO 8/9 FIC1100 saturated injectors and removed the resistorpack.
I have not driven the car yet but it idels fantasticly well! Better than with the 560 cc Evo injectors.
I set the K-constant for 952 cc injectors (1100cc run at 2.5 bar fuel pressure).