Nistune Forums

Posted: **Wed Sep 05, 2012 6:06 pm**

Just thought I'd share some CSV files for anyone using the same AEM gauges as me (with the DLP of course).

The most popular would probably be the UGEO AFR

Petrol AFR:

afr1-AEM-PetrolAFR.csv: (389 Bytes) Downloaded 267 times

E85 AFR:

afr1-AEM-E85AFR.csv: (389 Bytes) Downloaded 254 times

Lambda:

afr1-Lambda.csv: (409 Bytes) Downloaded 258 times

Posted: **Wed Sep 05, 2012 6:15 pm**

I also use their 35 PSI Boost Gauge (30-4406) on AUX1

The sensor that was bundled with my gauge is the 3.5 BAR/50 PSIa Brass Sensor (30-2131-50)

Positive is PSI, Negative is InHg (Same as the gauge display)

aux1-AEM Boost PSI-InHg.csv: (957 Bytes) Downloaded 241 times

Positive is PSI, Negative is also PSI

aux1-AEM Boost PSI.csv: (941 Bytes) Downloaded 246 times

Positive is Bar, Negative is also Bar

aux1-AEM Boost BAR.csv: (1.13 KiB) Downloaded 336 times

**Disclaimer**
I used the info available from AEM, So use at your own risk blah blah. Your stuff may be different than mine so review the files before using etc.

[rant]Why don't these a**holes make a water/oil temp gauge in Celsius! it's only a dip switch and a face plate[/rant]

Nistune Forums

Using AEM Gauges

Using AEM Gauges

Re: Using AEM Gauges