Re: LC1 lookup table
Posted: Sun May 22, 2011 2:49 am
oopsCoZZm0 wrote:"Tuesday next week" i would have assumed he meant Tuesday 24th.
"This Tuesday" would have meant Tuesday 17th.
sorry
sorry
Nistune Forums
Nistune is a real-time tuning suite designed especially for Nissan vehicles
http://forum.nistune.com/
LC1 lookup table
Page 2 of 2
sorry
Re: LC1 lookup table
Posted: Sun May 22, 2011 4:00 pm
should have it up today. I'm just testing the updates, drivers, widebands etc on different pcs at the moment to make sure it all works
Re: LC1 lookup table
Posted: Tue May 24, 2011 2:34 am
I'll try it out tonight and let you know how it works...thanks Matt!
Re: LC1 lookup table
Posted: Tue May 24, 2011 3:39 pm
The Innovate wideband reads correctly now, thanks!
The only issue I see at this point is that when an LC-1 and LM-2 are daisy chained, only one will read correctly, while the other reads 8 all the time
The only issue I see at this point is that when an LC-1 and LM-2 are daisy chained, only one will read correctly, while the other reads 8 all the time
Re: LC1 lookup table
Posted: Tue May 24, 2011 3:54 pm
Good stuff. I tested innovate to death (have LC-1 and LM-2 units here). Posted in the other thread. Don't do daisy chaining of 2 x AFR meters at the moment
Re: LC1 lookup table
Posted: Wed May 25, 2011 12:43 am
Matt wrote:Good stuff. I tested innovate to death (have LC-1 and LM-2 units here). Posted in the other thread. Don't do daisy chaining of 2 x AFR meters at the moment
How do I use both widebands without daisy chaining them? When I select Innovate MTS for the first wideband in the first drop down box, it is no longer available in the 2nd drop down box as an option for the 2nd wideband...
Thanks!
Re: LC1 lookup table
Posted: Wed May 25, 2011 2:15 am
Only one instance of innovate can be used. Daisy chaining will need to happen from Wideband 1 and automatically go into wideband 2. A change was made back May 2010 to allow only one Innovate to actively be used even though both could be selected
Still looking through the code changes between versions to see how it worked and what I can do with the updated code to get it going again
We did do daisy chaining - just been so long ago I forgot that it was possible
Still looking through the code changes between versions to see how it worked and what I can do with the updated code to get it going again
We did do daisy chaining - just been so long ago I forgot that it was possible
Re: LC1 lookup table
Posted: Sun Jun 26, 2011 8:19 am
Matt wrote:Tested again tonight with new updates. Seems to be working fine (put the max at 22 for better resolution in the vertical scale for logging). That will be out with the next update
After much debugging and testing today its looking very promising I should have a test version up about Tuesday next week. Crash problems seem to be fixed, but still need to retest Type 1 and other wideband units (so far DLP and Innovate have been my main test items). Knock counting reimplemented again tonight and tested on HCR32 ECU and that works nicely. Still to check logging of knock counting as well as playback
It seems the lookup tables changed back to the way they were. It shows a max of 32 again?
Re: LC1 lookup table
Posted: Wed Apr 04, 2012 2:37 am
this one is fixed for next release 0.10.15
Innovate wont use the AFR lookup tables at all. It will get min/max values directly from the unit (which can be configured)
I've added an item to remove unneeded tables
Innovate wont use the AFR lookup tables at all. It will get min/max values directly from the unit (which can be configured)
I've added an item to remove unneeded tables