RPM LOAD SCALE QUESTIONS
Moderator: Matt
RPM LOAD SCALE QUESTIONS
Hey everyone im having a little of a headache can i add more than 15.00 scales see in total u have 16 bars of load for rpms, fuel, etc... well i want to know if i can go up to 20.00 reason being so i can have more control of my timing/fuel management thanks
Re: RPM LOAD SCALE QUESTIONS
With the Nissan ECU you are stuck with 16 load columns and 16 RPM rows
If you are running out of resolution in a particular area, it is best take it from another area
For example on boost you may want to have more finer control over the maps there, so spread out the scale numbers on the lower non boost end and then make them closer together at the top end.
It will give you that finer control where you need it. Hope that makes sense
If you are running out of resolution in a particular area, it is best take it from another area
For example on boost you may want to have more finer control over the maps there, so spread out the scale numbers on the lower non boost end and then make them closer together at the top end.
It will give you that finer control where you need it. Hope that makes sense