Nistune Forums

Posted: **Tue Nov 17, 2009 9:56 am**

I'm using version 9.13.10b with address file Z32 type 2 version 5.

I'll go into stream mode and connect with consult, then I'll record a run and disconnect to play it back.

As soon as I disconnect and load the saved log file to play back, only the MAF and RPM is show in the log. I have to jump into excel and look at it that way if I want to see injector times, timing, etc.

Posted: **Tue Nov 17, 2009 5:37 pm**

thanks for putting this here. I'll go through that log file and see what is going on. What version are you currently recording that with?

Posted: **Thu Nov 19, 2009 11:53 pm**

found a problem in your log file due to nistune

header line is O2 (LHS), O2 (LHS)

should be O2 (LHS), O2 (RHS)

missing the RHS bit in the code due to bug. I've fixed that now and altered the heading in the log file using notepad and now it works

turbo the O2 RHS off for now during logging. fix in next release

Nistune Forums

logging feature will only record MAF & RPM

logging feature will only record MAF & RPM