Dont know if its a bug or not.. but the graph displays out of bounds...
Check the image attached...
This is using my .BIN file for the CA18DET
ROM PACK .BIN file produces same graph out of bounds..
idle/deceleration Gear RPM Timing
Moderator: Matt
idle/deceleration Gear RPM Timing
- Attachments
-
- displaybug.jpg
- (63.86 KiB) Downloaded 1595 times
File-Configuration- Table Filtered View
This will fix it up for the tables.
Will display 'Filtered' next to the table name when you display
But means that then you dont see the 'raw values' used by the ECU and can only make adjustments using +/- (not direct editing)
I would like to put a tick box on the table itself but not sure how i would present that yet
This will fix it up for the tables.
Will display 'Filtered' next to the table name when you display
But means that then you dont see the 'raw values' used by the ECU and can only make adjustments using +/- (not direct editing)
I would like to put a tick box on the table itself but not sure how i would present that yet