Type 1 ca18det dwell settin for bosch coils

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
Datto1600ca1det
 

Posts: 6
Joined: Sun Feb 26, 2017 5:51 pm

Type 1 ca18det dwell settin for bosch coils

Post by Datto1600ca1det »

Hi guys

This is my first post

Im runnin a type 1 board in my ca18det and i have just changed over to a bosch coil early vt 5.0l i think and i need to adjust the dwell to suit but i cant find what there dwell settin should be and my dwell settins currently look a bit out of whack
Attachments
Resized_20170226_164322_800x600.jpeg
(88.85 KiB) Downloaded 2039 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Type 1 ca18det dwell settin for bosch coils

Post by Matt »

Yes they look out of wack. Only modify the dwell vs voltage table

There should be a 'dwell time' guage which you can look at to see the current ms (dwell charge time) estimated by the software. The dwell time from memory is about 3.5ms so if you double the default values in the dwell/volt table it will effectively make it about 7ms for example
Datto1600ca1det
 

Posts: 6
Joined: Sun Feb 26, 2017 5:51 pm

Re: Type 1 ca18det dwell settin for bosch coils

Post by Datto1600ca1det »

Cheers for the reply is that the dwell time table i need to change

noob question
Datto1600ca1det
 

Posts: 6
Joined: Sun Feb 26, 2017 5:51 pm

Re: Type 1 ca18det dwell settin for bosch coils

Post by Datto1600ca1det »

Here is a veiw of all consult guages while.runnin
Attachments
Resized_20170227_192954_800x600.jpeg
(110.88 KiB) Downloaded 2024 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Type 1 ca18det dwell settin for bosch coils

Post by Matt »

replied via email. Also your other post on the Type 1 tune thread
Datto1600ca1det
 

Posts: 6
Joined: Sun Feb 26, 2017 5:51 pm

Re: Type 1 ca18det dwell settin for bosch coils

Post by Datto1600ca1det »

Cheers Matt
Post Reply