rb25det s2 z32ecu tune
Moderator: Matt
-
boarderline
- Posts: 20
- Joined: Thu Mar 27, 2014 6:29 am
rb25det s2 z32ecu tune
hey, I am very new to nistune. Working on getting my car to run good. I was wondering were or if anyone has some tune setups that they use on here that I could drop onto mine and tweak it from there. I have a rb25det with 550cc injectors, z32 maf, and a walbro 255l fuel pump. waste gate spring is set to about 10psi of boost. any suggestions?
Re: rb25det s2 z32ecu tune
Read the guides and go from there.
If you are going to be tuning you need to understand what is happening.
If you are going to be tuning you need to understand what is happening.
Re: rb25det s2 z32ecu tune
Hello,
Use the map which came with your Nistune ECU
Change the MAF / injectors in Nistune and check AFR ratios with a wideband.
That should be your base map.
From there you should visit a tuner/dyno or engage into (many) road tuning sessions.
You will need to read the manuals (Workshop/Tuner/..) provided on the Nistune website.
Use the map which came with your Nistune ECU
Change the MAF / injectors in Nistune and check AFR ratios with a wideband.
That should be your base map.
From there you should visit a tuner/dyno or engage into (many) road tuning sessions.
You will need to read the manuals (Workshop/Tuner/..) provided on the Nistune website.