Stagea Type 6 boards are HERE !!!

Nistune topics specific to the H8534/H8536 cpu

Moderator: Matt

Post Reply
skyline_stu
 

Posts: 151
Joined: Tue May 13, 2008 10:48 am
Location: Wide Bay Queensland

Stagea Type 6 boards are HERE !!!

Post by skyline_stu »

I've just finished the boards, adapters and have tested my ROM board version on a WC34 series ECU fully working
And boy am I happy !

It all works according to plan, I'll do some testing in a vehicle at some time over the next several days. I need to feed some sensor data into the ECU to check that it's all working,
but I can't see it being a problem as the hardware is working and I can emulate into the ECU.

These will be a little more expensive that the plain old type 6 as these is an additional adapter required to go from the Type6 to the ECU.

Remember these pics are the development prototype birdsnest. The finished board will be about the size of a credit card.

I'm looking for people to place deposits so I can fund the production of the units - Expect cost to be round the $650 + fit & post.
Your ECU will need to come here as the install process is complex and fiddly. Anticipate early Dec shipping - The boards will take a while to get here.

*******First 5 pre-orders get free install. ********

It will work with the Nistune Software and Consult cables - purchase these through the Nistune store.

Enquiries and more info email to

type6@optusnet.com.au

Stu

SCROLL RIGHT FOR R&D BIRDSNEST !!!!
Attachments
Stagea-working-emulation.JPG
Scroll Right for the protoype birdsnest
(433.78 KiB) Downloaded 3876 times
Last edited by skyline_stu on Sun Jan 12, 2014 7:52 am, edited 1 time in total.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Stagea Type 6 boards are HERE !!!

Post by Matt »

Post this over Skylines Australia
skyline_stu
 

Posts: 151
Joined: Tue May 13, 2008 10:48 am
Location: Wide Bay Queensland

Re: Stagea Type 6 boards are HERE !!!

Post by skyline_stu »

great idea!

Will do. Stu
Fuzzy
 

Posts: 33
Joined: Sun Dec 28, 2008 1:46 am
Location: Germany
Contact:

Re: Stagea Type 6 boards are HERE !!!

Post by Fuzzy »

Work with the H8/534 family? R33 GT-R / R33 GTS-T right??

What work needs to be done? unsolder the MCU an solder the Board?

If the ECU is socket it need still work?
skyline_stu
 

Posts: 151
Joined: Tue May 13, 2008 10:48 am
Location: Wide Bay Queensland

Re: Stagea Type 6 boards are HERE !!!

Post by skyline_stu »

It should work fine, do you have a rom image that I can patch to use the board?

Also If it has a PLCC socket it will work, but may require minor mods if it was an 80pin processor as my transition adapter (80pin QFP-84pin) relocates the crystal for improved reliability..

Do you have a picture of the ECU you can put up here Fuzzy?

Stu
skyline_stu
 

Posts: 151
Joined: Tue May 13, 2008 10:48 am
Location: Wide Bay Queensland

Re: Stagea Type 6 boards are HERE !!!

Post by skyline_stu »

See here for updated pictures & information


viewtopic.php?f=9&t=2708&p=20323#p20323

There is a high speed consult option available with the current V1.0 software which boasts over 25% faster map tracing.
At this time I have NOT confirmed if this will cause issues with inter-module communications.

Stu
Post Reply