Nistune?

Nistune topics specific to the H8534/H8536 cpu

Moderator: Matt

Post Reply
Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

Nistune?

Post by Fusion Ed »

Any idea where I can get a R33 rom board from? Multi-map one would be good... As no nistune boards are ready yet/planned?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

Post by Fusion Ed »

Ahh interesting thanks Matt.
Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

Post by Fusion Ed »

although its rather expensive, how did you get map tracing to work on that matt? Just the normal way via consult?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

yes i had maptracing and realtime emulation working quite well on that ECU

I've added TP to be uploaded to the emulator so you can realtime stream consult with load/RPM and realtime tune on this ECU
G-E
 

Posts: 7
Joined: Fri Jul 13, 2012 7:35 pm

Re: Nistune?

Post by G-E »

I poked around but found nothing..

What about the jecs wcr34 stagea ecu? A56-K39 L13 == 23740-0V802

The ecu came from a rwd auto with rb25det neo... are these nistune-able? Or what would be my best option if I need another ecu?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune?

Post by Matt »

0V802 = Type 4 board (Stagea NEO) so thats not an issue
bigboss59400
 

Posts: 7
Joined: Thu Mar 15, 2012 8:38 am

Re:

Post by bigboss59400 »

(Sorry to add a reply to a 5years old thread)
Matt wrote:yes i had maptracing and realtime emulation working quite well on that ECU

I've added TP to be uploaded to the emulator so you can realtime stream consult with load/RPM and realtime tune on this ECU
So how did you manage to do realtiming on an H8/534 ?

Thanks for all
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune?

Post by Matt »

Techtom board installed into H8/534 stock and tune via emulator. Board must be an unscrambled version (we have the R33 daughterboard ROM for this in our ROM pack)
bigboss59400
 

Posts: 7
Joined: Thu Mar 15, 2012 8:38 am

Re: Nistune?

Post by bigboss59400 »

Thanks for your reply

Ah ok I see
Did you try to read the xilinx chip ?

I don't understand what you said in the (), so do you sell a daughter board for the skyline R33 GTR ?
Do you know any place or maybe you who sell techtom board ? because they stopped a while ago and I can't find one...

Thanks
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune?

Post by Matt »

Xilinx chip is read protected and cannot be read

We have a ROM file for the board to put into EPROM chip. This is in Type 6 folder in ROM_Pack/Type6

Sorry I dont know where techtom boards are sold anymore
skyline_stu
 

Posts: 151
Joined: Tue May 13, 2008 10:48 am
Location: Wide Bay Queensland

Re: Nistune?

Post by skyline_stu »

There will be Type 6 boards available in the very near future. I have a working prototype ROM board in operation :)
I'm working on firmware to allow realtime tuning via consult. These will suit any 84pin PLCC device, plus I'm developing a board to suit the H8/536 variant. The 80pin QFP version will also be available, but it's going to be a bit if work to install it (the 80pin H8's are about 2/3 the size of PLCC with VERY small pins.

I'll post an update with pics/video as soon as I've got my main computer running again (capacitor plague reared its ugly head)

I've yet to hear of an unprotected Xilinx used in these designs. There's a lot of magic inside those CPLD's

Stu
Post Reply