Wideband Commander

Any wideband device that doesnt have its own category yet.

Moderator: Matt

Post Reply
txq45
 

Posts: 9
Joined: Fri May 16, 2008 1:54 am
Location: Plano. TX
Contact:

Wideband Commander

Post by txq45 »

I suspect you can use the Dynojet Wideband Commander ,, just wanted to confirm that it was compatible with Nistune... 8)
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

No we dont have support for that device

At this stage, you could route into a DLP A/D converter which we support
I have a stand alone engine management system in my vehicle, does the WBC have an output I can use?

Yes, the WBC does have a 0-5v or 0-5 mA linear output.
I've emailed them asking for USB protocol information. Whether they provide it or not is another thing
Fast Guy
 

Posts: 27
Joined: Sat May 12, 2012 3:25 am

Re: Wideband Commander

Post by Fast Guy »

Did you ever get anywhere with this?
I have a wideband commander. How do I connect it to Nistune to log it?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Wideband Commander

Post by Matt »

You will need to purchase a DLP A/D converter to hook the analog input into your laptop via the USB port
Fast Guy
 

Posts: 27
Joined: Sat May 12, 2012 3:25 am

Re: Wideband Commander

Post by Fast Guy »

I've got my wideband commander up and running now.

If anyone else is using it here's the conversion file for your DLPADConverter folder.
Attachments
afr1.csv
(366 Bytes) Downloaded 244 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Wideband Commander

Post by Matt »

Thanks I'll put that in the DLP folder
Post Reply