BCNR33 missing Parameter

Nistune topics specific to the H8534/H8536 cpu

Moderator: Matt

Post Reply
Fuzzy
 

Posts: 33
Joined: Sun Dec 28, 2008 1:46 am
Location: Germany
Contact:

BCNR33 missing Parameter

Post by Fuzzy »

I missing some parameter. Look at the details R32 RB26DETT vs. R33 RB26DETT

or it is not yet ready? :oops:

R32
Fuel Map
Timing Map
Knock Timing Map
Knock boost duty
MAF Translation
Fuel load scale
Ign Load scale
Fuel RPM scale
Ign RPM scale
Min TPulse width
Max TPulse width
TP Load Limit
TP Load Limit 2
Increase Fuel
Fuel recover
Fuel cut
Temp Conv
Dwell duty
First time enrich
After start enrich
Temp enrich
Crank Adv
Idle/Decel RPM Gear Timing
Idle/Decel RPM Neutral Timing
Idle Speed RPM
Idle Stablization
Knock Limit

Injection Multiplier
Injection Latency
O2 Feedback Temp
Rev Limit 1
Speed Limit 1
Speed Limit 2
Speed Limit 3


R33
Fuel Map
Timing Map
Knock Timing Map
MAF Translation
Fuel load scale
Ign Load scale
Fuel RPM scale
Ign RPM scale
Min TPulse width
Max TPulse width
TP Load Limit
Increase Fuel
Temp Conv
Idle Stablization Max
Knock Limit

Injection Multiplier
Injection Latency
O2 Feedback Temp
Rev Limit 1
Speed Limit 1
Volt Latency Change
PL
 

Posts: 957
Joined: Fri Feb 03, 2006 3:29 pm
Location: Adelaide, South Oz
Contact:

Post by PL »

All parameters are not available for all ECU's.

Some have been more thoroughly investigated than others. As more is discovered about each ECU the address files are updated to add this extra functionality.

PL
Post Reply