Posted: Thu Sep 06, 2007 2:09 am
I found a main enrichment table sitting at H1860, changing settings there (temperature related) has an effect even in neutral gear idle.
If I richen up the mixture to 10AFR it´s possible to drive the car with TPS sensor plugged in, but running THAT rich all the time surely isn´t very good for cash and engine as well since it cleans the cylinder walls...but the good point is that now I know for sure that after I have the throttle enrichment table I can drive the car normally
At H1850 there is the same table as mentioned above, but altering it has no effect in idling...
What makes me wounder, found two tables looking like RPM idle speed, sitting at H1A10 and H1EC0 and aiming at 625rpm respectively 650rpm around usual working temperature, but altering here doesn´t relly put revs where I expect them to be...
If I richen up the mixture to 10AFR it´s possible to drive the car with TPS sensor plugged in, but running THAT rich all the time surely isn´t very good for cash and engine as well since it cleans the cylinder walls...but the good point is that now I know for sure that after I have the throttle enrichment table I can drive the car normally
At H1850 there is the same table as mentioned above, but altering it has no effect in idling...
What makes me wounder, found two tables looking like RPM idle speed, sitting at H1A10 and H1EC0 and aiming at 625rpm respectively 650rpm around usual working temperature, but altering here doesn´t relly put revs where I expect them to be...