R33 Type 6 boards

Nistune topics specific to the H8534/H8536 cpu

Moderator: Matt

skyline_stu
Posts: 151
Joined: Tue May 13, 2008 10:48 am
Location: Wide Bay Queensland

Re: R33 Type 6 boards

Postby skyline_stu » Tue Apr 01, 2014 8:23 pm

Yes, the 24U00 will be included in the release. It's already coded.

The biggest delay has been a batch of counterfeit logic chips. I've taken it up with the supplier and they were going to test/inspect and replace the chips.
That was many weeks ago and they have stopped replying to my recent email demands to get their s^&t together.
What I though was a bargain has turned into a nightmare!! From my investigations this is a common practice with these chips.

I'm thinking about purchasing another batch from a factory authorised supplier, but funding is holding me back at this time. Not only is the freight far higher, but the devices are 3 times as much for the industrial grade parts.
I'm not happy using the equivalent 'commercial grade' parts in critical application like ECU's.

Fortunatly, end user pricing won't change.

It'll be well worth the wait.

Matt's been helpful in providing a software upgrade that allows a much higher data transfer rate - it's atleast 25% quicker so datalogging and map tracing will be greatly enhanced.

My health has not been the best recently, but one good thing is that on Monday I won a court case againt the guy who robbed me last year.

Stu

dontfeelcold
Posts: 13
Joined: Thu May 19, 2011 8:25 pm

Re: R33 Type 6 boards

Postby dontfeelcold » Wed May 28, 2014 11:53 am

Any more info on this?

nanook
Posts: 79
Joined: Tue Dec 30, 2008 2:42 pm
Location: Auckland, New Zealand

Re: R33 Type 6 boards

Postby nanook » Wed May 28, 2014 5:03 pm

Sadly I think Stu is not well
Last edited by nanook on Thu May 29, 2014 5:54 pm, edited 1 time in total.

Matt
Site Admin
Posts: 8038
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: R33 Type 6 boards

Postby Matt » Thu May 29, 2014 12:04 am

Spoke to Stu a number of weeks ago. Still sorting out counterfeit chips and some other things which have been going on. Hopefully we see something soon

djstatic
Posts: 175
Joined: Fri Apr 16, 2010 8:59 pm
Location: South East QLD, Gold Coast

Re: R33 Type 6 boards

Postby djstatic » Mon Aug 03, 2015 5:25 pm

We should crowd fund the Type 6 development if money is an issue.

Matt
Site Admin
Posts: 8038
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: R33 Type 6 boards

Postby Matt » Mon Aug 03, 2015 6:56 pm

I don't think that is the issue... but I've not heard from him in over six months. I just advise using the RB20 ECU with VCT add on now offered. Works fine

Jono
Posts: 22
Joined: Mon Nov 11, 2013 11:31 pm

Re: R33 Type 6 boards

Postby Jono » Mon Nov 30, 2015 11:27 pm

I was getting excited then I read the last few posts :(

We really need this. It's so close!

Matt
Site Admin
Posts: 8038
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: R33 Type 6 boards

Postby Matt » Wed Dec 02, 2015 9:05 am

Yeah it would be good to use the R33 ECU but despite offering funding etc I haven't heard back.

Jono
Posts: 22
Joined: Mon Nov 11, 2013 11:31 pm

Re: R33 Type 6 boards

Postby Jono » Wed Dec 02, 2015 10:20 am

This is a huge development for the R33 market and I really think we should push it.

Is Stu okay? From what I read he is having some health issues?

Hope he's okay.

Matt, I could sell loads of these. Are you in a position to take it over if Stu can't continue it?

Matt
Site Admin
Posts: 8038
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: R33 Type 6 boards

Postby Matt » Thu Dec 03, 2015 9:58 am

I can't... its not my design or product. I would if I had contact back but I don't think its going to happen. Gave up it a while ago


Return to “Other vehicles”

Who is online

Users browsing this forum: No registered users and 1 guest