R32 RB26DETT 05U6F Knock

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
Ross
 

Posts: 7
Joined: Thu Jan 10, 2013 2:21 pm

R32 RB26DETT 05U6F Knock

Post by Ross »

This ECU is capable of knock recording and control, correct? While connected to the ecu, the knock warning panel will not display. It will display when viewing logs while disconnected, but the knock limits window grayed out (see attached). Also, "Mark Knocking" is grayed out on the maps. I am on the latest update, but have had this issue on every version of Nistune that I have used with this ECU.

Thanks for your help, and Happy New Year!

Kind regards,

Ross
Attachments
Knock Control Panel.JPG
(39.96 KiB) Downloaded 1416 times
Ross
 

Posts: 7
Joined: Thu Jan 10, 2013 2:21 pm

Re: R32 RB26DETT 05U6F Knock

Post by Ross »

I believe I just found my answer on page 64 of the Users Manual V1.9. It states that knock detection counting firmware is in progress for the BNR32 RB26; any idea on a time frame?

Kind regards,

Ross
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: R32 RB26DETT 05U6F Knock

Post by Matt »

I stopped looking at knock reporting in the factory ECU. It is best to use proper knock headphones. The ECU uses a narrowband filter, which is then used to record a count. It does not always pickup all knock, so cannot be used alone for detection purposes

Some ECUs do it differently than others, and R32 and earlier ECUs were easier to find the counter.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: R32 RB26DETT 05U6F Knock

Post by Matt »

Raised an issue report to investigate
http://www.nistune.com/mantis/view.php?id=188
Ross
 

Posts: 7
Joined: Thu Jan 10, 2013 2:21 pm

Re: R32 RB26DETT 05U6F Knock

Post by Ross »

Thanks Matt. I always use my knock headphones, but love the ECU functionality as a back-up if possible :D
Post Reply