New User..R32 Gts4..Consult connected yesterday, now it won't.

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Greyztrack
Posts: 1
Joined: Thu Feb 16, 2017 1:03 pm

New User..R32 Gts4..Consult connected yesterday, now it won't.

Postby Greyztrack » Sat Feb 18, 2017 5:30 am

New user and just yesterday, I connected the consult to my R32 Rb20det and it worked fine. When I went to connect it the following day, it wont connect. I just have the single red light on the cable and when i click on the downward green icon or any other icon, i get a prompt that the consult is not connected. What could have changed that it will no longer connect? Laptop is windows 10. I tried downloading nistune again and still no luck. Checked device manager and plms is good. Any help appreciated. Ty

Matt
Site Admin
Posts: 7897
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: New User..R32 Gts4..Consult connected yesterday, now it won't.

Postby Matt » Tue Feb 21, 2017 2:46 pm

What port is the consult port connected to?

File > Configuration > Consult port
(Should show COMX)

When you press CONSULT button (not UP / DOWN buttons) then do you get the TX/RX lights flashing on the cable at all? If you get only the one light flashing when attempting connection, then you have an issue with the consult port to vehicle

If the check engine light (and ECU LED) is on but not flashing then the Nistune board is working okay

More info here:
https://www.nistune.com/docs/Installation_and_Communication_Diagnostics.pdf


Return to “Type 2”

Who is online

Users browsing this forum: No registered users and 3 guests