Dropping timing in 4th r32 ecu / r33

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
gonz12345
 

Posts: 8
Joined: Fri Mar 18, 2016 12:50 pm

Dropping timing in 4th r32 ecu / r33

Post by gonz12345 »

Hey guys , finally got time these holidays to work on tuning. After doing a few runs and grabbing some logs i noticed the ecu is dropping 5* of timing at 6k Rpm in third and all of 4th gear in high load WOT. This finally explains the sluggish transition from 3rd to 4th at WOT. I have the 04uxx r32 ecu running my r33 that has no knock maps right?, my detonation ignition retard is set to 7 so should be dropping 7* not 5* if im knocking. Everythings fairly conservative as far as im aware in terms of timing and fuel.

secondly on deceleration i am running too rich, drops to around 10 afr sometimes even when cruising around low load between shifts/ coming to a stop. is this caused by my BOV? i tried messing with fuel cut and recover with no success.

mods
q45 afm
stock injectors
garret ar50/63 @ 15psi
walbro
etc
Attachments
gg.PNG
(145.47 KiB) Downloaded 1162 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Dropping timing in 4th r32 ecu / r33

Post by Matt »

Do you have a knock sensor fault code?

What if you turn off the knock sensor (using 'K' button) on the map?

The ECU will retard upto the maximum retard, and it gradually decreasing timing depending on amount of knock
Post Reply