Z32 idle problem

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
kcolocar
 

Posts: 4
Joined: Tue Jun 16, 2015 12:15 pm

Z32 idle problem

Post by kcolocar »

Hello, I've been trying to figure out how to set my idle to be 14.7 with the feature pack.

I have 740cc injectors (340cc stock) and a selin set to avg mode. My K is doubled since the selin is at avg. My TIM is at 315. My latency is at 690. Cruising at closed loop is in the mid 13s-14s afr.

My problem is that anytime I lean out my latency until the afr is 15, my STFT will shoot to >10%. If I leave it like this for a few minutes, it'll transfer to the LTFT. Once this happens, the afr will drop to the 12s. My idle stays from 12-13 until I clear the LTFT, at which time it goes up to 14.7-15 and the whole process starts again. My idle smell likes gas hanging out in the 12-13afr and I want to get this figured out. I appreciate any help.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Z32 idle problem

Post by Matt »

STFT/LTFT numbers are only valid during closed loop

At idle these numbers are not fuel trims so dont take notice of them then

Make sure trims around 0% at cruise STFT/LTFT only
Post Reply