vct triggerd via egr

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
boostjunkie
 

Posts: 7
Joined: Fri Jan 08, 2016 6:59 am

vct triggerd via egr

Post by boostjunkie »

anybody help me with the vct being triggered via the egr solenoid my bnr32 nistune ecu has some vct settings pop up with the feature pack update is it triggered via ac pin like r32 rb20det or ive read its egr , what pin would this be as the bnr32 gtr ecu pinout does not show it?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: vct triggerd via egr

Post by Matt »

This setup was done for a japanese customer using R32 RB26DETT with VCT module. Addresses were added to the feature pack to support this setup

It is not done using EGR but fuel pump output (same as R32 VCT activation for RB25 - see Feature Pack hardware manual)

However your board needs the RB26 VCT firmware loaded into it to use it (not in there with the default FP firmware)
Post Reply