Tuned ROM images here!

Nistune topics specific to the 6802 cpu

Moderator: Matt

FlawleZ
 

Posts: 25
Joined: Sun May 25, 2008 1:07 pm
Location: San Antonio

Re: Tuned ROM images here!

Post by FlawleZ »

Well this is a little late for some who may have been interested. I'm going to go ahead and post up one of my older BIN files just for reference. This is was simply a driveable tune on my car after I installed the Schneider 274 cams, PT6262, and StreetFighter manifolds. It was by no means a finished tune. This is for 93 Oct pump.
Attachments
4.30.12-new tune.bin
(16 KiB) Downloaded 356 times
hausoo
 

Posts: 6
Joined: Thu Jan 16, 2014 3:15 pm

Re: Tuned ROM images here!

Post by hausoo »

L28ET stock internals t3/t4 hybrid turbo small intercooler street tune with logs no dyno
88/89 z31ecu 26pxx pump gas 91oct

update:@20psi boost increased scales added more timing down low better response
Attachments
NIStune_2014-12-20_b-TEST31.csv
(175.88 KiB) Downloaded 271 times
NIStune_2014-12-20_a-TEST31.csv
(197.29 KiB) Downloaded 267 times
L28ET.FORD.MAF.inj437CC.fp43psi.boost20psi.TEST31.bin
(16 KiB) Downloaded 297 times
Last edited by hausoo on Mon Dec 22, 2014 11:36 am, edited 2 times in total.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Tuned ROM images here!

Post by Matt »

Using Z31 ECU with 26P00 base image. Good stuff
LOwchaNZ
 

Posts: 6
Joined: Wed Nov 12, 2014 4:52 am

Re: Tuned ROM images here!

Post by LOwchaNZ »

Hey Guys :mrgreen: ,

someone here, who has a Stage 1 map for Nistune (s13, ca18det)?
No further modifications, just like the Horsham map.
I want to use it as a basemap for my car, which just reached the stage 1 :mrgreen:

greetz
Lorenz
zbeffreyCA18
 

Posts: 12
Joined: Tue Mar 04, 2014 11:05 am
Location: Bay City, MI USA

Re: Tuned ROM images here!

Post by zbeffreyCA18 »

Deatschwerks 550cc Injectors @ 44psi static pressure
Z32 MAF
BB T28 Turbo
2.5" Turbo Oulet
3" Exhaust after turbo outlet
Greddy S13 T25 to S15 T28 Turbo intake suction kit

This should get your running on start up no problem. I'm on day 2 right now and it runs like stock.
Attachments
CA18DET Running map changed latency 5-29-15 UPDATED.bin
(16 KiB) Downloaded 460 times
mattlovo
 

Posts: 42
Joined: Fri Jan 01, 2016 10:56 pm

Re: Tuned ROM images here!

Post by mattlovo »

Has any guys tried out a tune on
- stock 180sx CA18DET engine
- T28BB turbo
- 370cc stock injectors
- R35 afm
- the usual FMIC, open pod filters and 3 inch invidia exhaust system.

Future mods will be R35 GTR Injectors on top of the existing mods.
Shaker
 

Posts: 38
Joined: Wed Sep 23, 2015 8:00 pm
Location: Germany
Contact:

Re: Tuned ROM images here!

Post by Shaker »

mattlovo wrote:Has any guys tried out a tune on
- stock 180sx CA18DET engine
- T28BB turbo
- 370cc stock injectors
- R35 afm
- the usual FMIC, open pod filters and 3 inch invidia exhaust system.

Future mods will be R35 GTR Injectors on top of the existing mods.
That's almost my specs ;)
GT2560R (if that's your T28BB)
350Z MAF

self tuned.
SR_32
 

Posts: 1
Joined: Tue Aug 23, 2016 8:24 pm

Re: Tuned ROM images here!

Post by SR_32 »

Can anyone help me locate a tune for

CA18DET (Japanese 8 Port head)

Z32 MAF
440 CC inj
Stock turbo
FMIC
3" turbo back exhaust
Running on Stock .5 bar of boost currently
Datto1600ca1det
 

Posts: 6
Joined: Sun Feb 26, 2017 5:51 pm

Re: Tuned ROM images here!

Post by Datto1600ca1det »

Datsun 1600 ca18det

300hp on 20 psi

Forged pistons
3 peice head gasket
Exhaust cam on inlet side
Adjustable cam gears
1200cc injs
Hpx1 maf
Nistune ecu
Long runner low mount turbo manifold
Gt2876rs turbo
split dump
2.5" ss exhaust 3" after diff cradle
Holley primer pump
3l surge tank
044 fuel pump

Not happy with this tune please help
Attachments
datsun 1.bin
(16 KiB) Downloaded 217 times
Datto1600ca1det
 

Posts: 6
Joined: Sun Feb 26, 2017 5:51 pm

Re: Tuned ROM images here!

Post by Datto1600ca1det »

Datto1600ca1det wrote:Datsun 1600 ca18det

300hp on 20 psi

Forged pistons
3 peice head gasket
Exhaust cam on inlet side
Adjustable cam gears
1200cc injs
Hpx1 maf
Nistune ecu
Long runner low mount turbo manifold
Gt2876rs turbo
split dump
2.5" ss exhaust 3" after diff cradle
Holley primer pump
3l surge tank
044 fuel pump

Not happy with this tune please help
Attachments
Resized_20161017_151826_800x600_1024x768_1280x960.jpeg
(129.88 KiB) Downloaded 12517 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Tuned ROM images here!

Post by Matt »

I dont know where to start here, the tuner did not know what they were doing...

Fuel maps are all over the place (should usually be nice and smooth). You can see from the AFRs in the dyno sheet there is a huge gap

Fuel recovery table changed... not sure why
Crank enrich table all over the place. Normally take the
Temp enrich should not need changing (when warm)
Dwell time should adjust the entire area consistency (not just a dump around 11-14 volts)
Dwell duty should not be adjusted

Idle/decel timing table messed up (put back to factory)
Idle offset vs temp should not normally need changing
Latency change vs volt should not normally need changing
Latency would set about 1150

Problem is modifying one parameter/table runs incorrectly can then affect how the rest of the ECU runs.

Timing looks smooth and should be okay. Scales are probably ok (but need to check via log). Fuel map needs fixing, and put above tables back to factory in the meantime (open second compare image and then use COPY button to revert to factory tables)
smurfenglubb
 

Posts: 12
Joined: Tue Jul 01, 2014 2:59 am
Location: Sweden
Contact:

Re: Tuned ROM images here!

Post by smurfenglubb »

S13 E85 CA18DET 800cc z32 GT2871R
Hopefully helpful for someone
Attachments
S13 E85 CA18DET 800CC Z32.bin
(16 KiB) Downloaded 296 times
martinb12gti
 

Posts: 16
Joined: Fri Apr 12, 2013 11:28 pm

Re: Tuned ROM images here!

Post by martinb12gti »

Car: Nissan Sunny B12 Coupe
Engine: CA18DE
ECU: CA18DET

Also from CA18DET: Intake manifold, injectors, throttle body and sensor, fuel pump.
from CA16DE: shorter Gearbox, lighter clutch, lighter flywheel, full exhaust system, replacement catalytic converter 400 cells
power steering removed

No knocks, for years...

Next step: 200 cell cat, poncams

The torque curve is not so good, i think it's because the small CA16 exhaust system and the 400 cell cat holds the exhaust gases back...
Attachments
Prüfstand-Dyno.jpg
(485.73 KiB) Downloaded 12413 times
sunny-24-04-2017.bin
(16 KiB) Downloaded 175 times
FreakensNL
 

Posts: 17
Joined: Wed Mar 30, 2016 9:56 pm

Re: Tuned ROM images here!

Post by FreakensNL »

Hi Guys,

CA18DET EDM head and JDM block
CP pistons
GT2860RS a/r 0.86 (disco patato)
Approx. 700-800cc injectors
Z32 AFM
3"with 2" end muffler (law)
...350Z gearbox :twisted:

1,4 Bar = 20 PSI

it ran 335bhp and 410Nm
Runs pretty rich 10-11:1

if anyone has tips on this map let me know!
Attachments
S13 Z32 750cc. FC Map V1.1.bin
(16 KiB) Downloaded 207 times
iets minder brandstof fc backup_2018-11-20_1926_19.csv
(37.57 KiB) Downloaded 121 times
dolfosanchez98
 

Posts: 1
Joined: Fri Dec 07, 2018 5:57 pm

Re: Tuned ROM images here!

Post by dolfosanchez98 »

anyone have a tune for s13 ka24e with turbo. 550 inj z32 maf 255 fuel pump and stock internals?
Post Reply