Don't know what I'm doing

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
daveb666
 

Posts: 5
Joined: Thu Jul 12, 2018 9:50 pm

Don't know what I'm doing

Post by daveb666 »

Bought a type 1 board from Nistune direct and Matt kindly put a basemap on.

Spec is z32 afm, 440cc injectors, t28 usual bolt-ons.

Fitted the board, turned the key and the car fired up fine. Matt said get it tuned properly as the map won't be setup for a T28 - my tuner is some miles away so my intention was to get a map from someone else that would be better suited for the T28.

I was sent two maps that were z32, 440cc and t28 turbo. The process I followed was thus -

Open Nistune, turn on ignition, click consult.
'open' on the 'Main' line and chose the new map
The 'Upload to ECU'
Then 'Burn'

Tried to turn the key, car turns over but won't come close to starting.

I repeated the same process using the other map I was sent and the same things happens - no starting. I've attached both maps for reference.

Yes I have learnt my lesson, no I won't ever touch it again :(

What's strange is that if I choose 'Download Maps from ECU' the one that comes back is called "S13_CA18DET_44F0F_MT_MEC-D009D_FP_maps" which isn't close to the one I thought I'd uploaded.

Help please :(
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Don't know what I'm doing

Post by Matt »

I've emailed you an FP update of the file directly.

Please don't post third party commercial BIN files here (removed)
Post Reply