200sx S13 ka24e question

Nistune topics specific to the 6802 cpu

Moderator: Matt

raddy
Posts: 158
Joined: Mon Mar 16, 2009 9:52 pm

200sx S13 ka24e question

Postby raddy » Tue Mar 21, 2017 10:58 pm

Hi all

I got ECU from 200sx S13 with ka24e engine with ECU number A11-B15G11 0205 and inside of the ecu with G280AFM8 at the eprom sticker. Im not sure which address file is correct for this ecu (and for nistune board configuration)?

Thank you for your help

Matt
Site Admin
Posts: 7649
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: 200sx S13 ka24e question

Postby Matt » Tue Mar 21, 2017 11:39 pm

S13 KA24E 240SX 89 USDM 40F05 N M F A11-B15 G11

Type 1 board and we have 40F01 as closest part number for this ECU in the ROM pack

raddy
Posts: 158
Joined: Mon Mar 16, 2009 9:52 pm

Re: 200sx S13 ka24e question

Postby raddy » Mon Mar 27, 2017 7:30 pm

Thanks for the info Matt. May I also ask if this ECU can directly accept 0-5V AFM or use 2-7V offset and have to be hardware adjusted for 0-5V AFM types?

Thank you

Matt
Site Admin
Posts: 7649
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: 200sx S13 ka24e question

Postby Matt » Wed Mar 29, 2017 10:07 am

Direct 0-5 volt input on this ECU. Only the older Z31/R31 models (1984-1989) use the 2-7 volt MAFs


Return to “Type 1”

Who is online

Users browsing this forum: No registered users and 3 guests